Publication
Multiaxial fatigue criteria for prestressed strengthening of steel connections
Publications associées (34)
Experimental and analytical investigation of shear-reinforced concrete and dowel action
Codes of practice can be overly conservative, particularly for the shear resistance of reinforced concrete beams with shear reinforcement when large loads act close to supports. This thesis addresses the topic by proposing a refined design approach based o ...
EPFL2024The influence of the kinematics of rough surface engagement on the transfer of forces in cracked concrete
One of the most instrumental aspects governing the response of structural concrete at ultimate limit state refers to the possibility of developing smeared cracking patterns within a member (associated normally to the presence of sufficient reinforcement fo ...
2021Multiaxial fatigue analysis of high-strength steel welded joints using generalized local approaches
The objective of this thesis is to improve methods for predicting the fatigue life, multiaxial or not, of mild- and more particularly high-strength steels using local approaches that have the capacity to be applicable to almost any cases, hence the term ge ...
EPFL2020A detailed view on the rebar–to–concrete interaction based on refined measurement techniques
Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone
Simplified assumptions have traditionally been made on the rebar–to–concrete interaction in structural concrete to calculate the stress state in rebars. Such assumptions typically consider a uniform stress state in the reinforcement at a given cross sectio ...
2020Prediction of autogenous shrinkage of cement pastes as poro-visco-elastic deformation
Karen Scrivener, Zhangli Hu, Pietro Lura
Precise and robust predictions of autogenous shrinkage of high performance concrete are essential to limit self-induced stresses and cracking in modern concrete structures. This paper presents predictions of autogenous shrinkage for three cement pastes of ...
PERGAMON-ELSEVIER SCIENCE LTD2019Thermally activated iron-based shape memory alloy for strengthening metallic girders
Ardalan Hosseini, Masoud Motavalli, Elyas Ghafoori, Julien Michels
The study presents a new retrofit solution for strengthening metallic I-girders. The retrofit system involves two iron-based shape memory alloy (Fe-SMA, ‘memory-steel’) strips (each with a width and thickness of 50 and 1.5 mm, respectively) that are mechan ...
2019