Ultraviolet Filtration Passivator for Stable High-Efficiency Perovskite Solar Cells

Although the published values of power conversion efficiency (PCE) have increased continuously in recent years for perovskite solar cells (PSCs), improvements in the stability and performance of PSCs with conventional TiO2 or SnO2 electron transport layers (ETLs) remain limited by the presence of nonideal interface defects and low ultraviolet (UV) absorption. In this study, 2-hydroxy-4-methoxy-5-sulfonate-benzophenone (SBP), an inexpensive water-soluble sunscreen raw material, was incorporated into the SnO2 ETL as a UV filter. It was found that the exposure of perovskite to UV light was significantly reduced, and, more importantly, the carbonyl and sulfonic acid groups in the SBP influenced both the perovskite crystallization process and the passivation of defects in the ETL/perovskite film interface. As a result, the PCE of SBP-based devices was increased to 22.54% from 20.78% of the control sample, with a concomitant decrease in the hysteresis. Moreover, the efficiency of champion devices with SBP decreased by less than 5% after 200 h of continuous UV (1.63 mW/cm2, 285 nm) irradiation, while the control group dropped to below 75% of the initial value, thus showing significantly improved stability.

Strategies to Optimizing Dye-Sensitized Solar Cells

Sophie Wenger

Dye-sensitized solar cells (DSCs) constitute a novel class of hybrid organic-inorganic solar cells. At the heart of the device is a mesoporous film of titanium dioxide (TiO2) nanoparticles, which are coated with a monolayer of dye sensitive to the visible region of the solar spectrum. The role of the dye is similar to the role of chlorophyll in plants; it harvests solar light and transfers the energy via electron transfer to a suitable material (here TiO2) to produce electricity — as opposed to chemical energy in plants. DSCs are fabricated of abundant and cheap materials using inexpensive processes (e.g. screen-printing) and are likely to be a significant contributor to the future commercial photovoltaic technology portfolio. The work conducted during this thesis aimed at optimizing the DSC using three different strategies: The use of versatile organic sensitizers for stable and efficient DSCs, the study of tandem device architectures in combination with other solar cells to harvest a larger fraction of the solar spectrum, and the development of a validated optoelectric model of the DSC. Organic donor-π-acceptor dyes are an interesting alternative to the standard metal-organic complexes used in DSCs. Efficient photovoltaic conversion and stable performance could be demonstrated with three classes of donor systems, namely diphenylamine, difluorenylaminophenyl, and π-extended tetrathiafulvalene. The highest conversion efficiencies were obtained with a difluorenylaminophenyl donor system (η = 8.3 % with a volatile electrolyte and η = 7.6 % with a solvent-free ionic liquid, which was a new record for organic dyes at the time of publication). Surprisingly, efficient regeneration of the oxidized dye by the I-/I3- redox mediator was found with the π-extended tetrathiafulvalene system, even though the thermodynamic driving force was as low as 150 mV. So far driving forces of 300-500 mV had been regarded as necessary for efficient regeneration of the dye cation. Also, important structure-property relationships pertaining to the recombination of electrons with the electrolyte and to the stability of the device could be identified (i.e. effect of linear vs. branched structure, linker length, and moieties used). The power conversion efficiency of solar cells can be extended beyond the limit for a single cell (∼ 30 %) by using multiple cells with different optical gaps in a tandem device. DSCs and chalcopyrite Cu(In,Ga)Se2 (CIGS) solar cells have complementary optical gaps and are thus suitable systems for integration in a tandem device. It was shown that a monolithic DSC/CIGS tandem device has the potential for increased efficiency over a mechanically stacked device due to increased light transmission to the bottom cell, and a monolithic DSC/CIGS device with an initial efficiency of η = 12.2 % was demonstrated. The degradation of the devices — induced by the corrosion of the CIGS cell in contact with the I-/I3- redox mediator — could be retarded with a protective thin conformal ZnO/TiO2 oxide layer coated on the CIGS cell by atomic layer deposition. Finally, an experimentally validated optical and electrical model of the DSC has been developed to assist the optimization process, which is predominantly conducted by empirical means in the DSC research community. The optical model allows to accurately calculate the internal quantum efficiency of devices, i.e. the ratio of extracted electrons to absorbed photons by the dye, a crucial and so far difficult to determine characteristic. Intrinsic parameters — like injection efficiency, electron diffusion length, or distribution of trap states in the TiO2 — can be extracted from experimental steady-state and time-dependent data with the electric model. The model allows to make a comprehensive and quantitative loss analysis of the different optical and electric loss channels in the DSC. The model has been implemented with a graphical user interface for straightforward usage. All three optimization strategies — organic dyes, tandem architecture, and device modeling — developed during this thesis make a valuable contribution to the development and commercialization of inexpensive and high efficiency DSCs. They enable a comprehensive view of the system and pave the way for a systematic analysis and reduction of losses, which has been the ultimate route to success for several established photovoltaic technologies.

EPFL2010

Investigation on the impact of passivation in perovskite solar cells

Erfan Shirzadi

Conversion of sunlight to electricity is the most plausible approach towards the generation of renewable energies. During recent decade lead halide perovskites (LHPs) have proven to be promising candidates for photovoltaic applications such as solar cells. LHPs can be made easily in laboratories around the world via solution process methods and many universities can afford to participate in their development. How-ever, LHPs suffer from instability issues and their efficiencies can be further improved. In this thesis, both instability and efficiency challenges are addressed. We showed by doping the precursor of methylammonium lead iodide (MAPbI3) perovskite with a relatively large cation of 2-Choloroethylammonium (CLEA), perovskites films with CLEA incorporated into their structures are formed. The novel perovskite is able to withstand high temperatures as high as 80°C while achieving efficiencies > 19% in MAPbI3-based perovskite solar cells (PSCs). Various approaches have been employed for the passivation of the defects in perovskite solar cells Vari-ous approaches have been employed to passivate the defects in perovskite films used in perovskite solar cells (PSCs). However, the passivation mechanism is often unclear at a molecular level and the reason for enhanced PSC performance remains elusive. Here, we describe passivation based on the deposition of two dimensional (2D) perovskites (obtained from para-halophenylethylammonium iodide) on the surface of perovskite films. Moreover, the mechanism of passivation was elucidated and was traced to the high work function of the 2D perovskites, which induce band-bending at the surface of perovskite film and therefore reduces the charge carrier recombination at the interface of perovskite and the hole transporting material (HTM). Efficiencies >22% with average voltages >1.15 V were achieved using a typical mesoporous-TiO2 and Spiro-OMeTAD device configuration. This study paves the way for PSCs efficiency improvement by rational design. The employment of 2D perovskites is a promising approach to tackle the stability and voltage issues inherent in perovskite solar cells. It remains unclear however whether other perovskites with different dimensionalities have the same effect on efficiency and stability. Here, we report the use of quasi-3D azetidinium lead iodide (AzPbI3) as a secondary layer on top of the primary 3D perovskite film that results in significant improvements in the photovoltaic parameters. Remarkably, utilization of AzPbI3 leads to the passivation resulting in a power conversion efficiency (PCE) of 22.4 %. The open-circuit voltage obtained is as high as 1.18 V, which is among the highest reported to date for single-junction perovskite solar cells, corresponding to a voltage deficit of 0.37 V for a bandgap of 1.55 eV. Studying the compositional instability of mixed ion perovskites under light illumination is important to understand the mechanisms underlying their efficiency and stability. However, current techniques are limited in resolution and are unable to deconvolute minor ion migration phenomena. Here, we describe a method that enables ion migration to be studied allowing different segregation mechanisms to be elucidated. We applied statistical analysis to cathodoluminescence data to generate compositional distribution histograms. Using these histograms, we identified two different ion migration phenomena, horizontal ion migration (HIM) and vertical ion migration (

EPFL2021

Investigation on the impact of passivation in perovskite solar cells

Erfan Shirzadi

EPFL2021

Strategies to Optimizing Dye-Sensitized Solar Cells

Sophie Wenger

EPFL2010