Numerical Modeling of FRP-Strengthened Masonry Structures Using Equivalent Frame Models
Publications associées (40)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The contributions assembled in the present volume proceed from the lectures of the 2009 ALERT Geomaterials School devoted to the Failure in the multiphase geomaterials. The multiphase behaviour of geomaterials used to be mainly considered from the point of ...
In the context of sustainable development, building insulation represents a major concern as a means of increasing energy efficiency. In order to comply with new norms such as the Passive House standard, locations where load-bearing components must penetra ...
Structural R/C cores are a popular and efficient choice as lateral-load resisting system in medium to tall buildings. The walls of the cores typically present large openings providing access to elevators placed within them. Shear induced by lateral forces ...
This paper compares different models currently used to calculate the shear strength of unreinforced masonry (URM) walls retrofitted using fiber reinforced polymers (URM-FRP). The shear strengths of six recently tested URM-FRP walls were compared to shear s ...
Fiber-reinforced polymer (FRP) composites offer several advantages in relation to traditional materials, such as high specific strength, good corrosion resistance, low thermal conductivity and rapid component installation. Despite the great potential of th ...
The behavior of seven one-half scale masonry specimens before and after retrofitting using fiber-reinforced polymer (FRP) is investigated. Four walls were built using one-half scale hollow clay masonry units and weak mortar to simulate walls built in centr ...
This thesis addresses the seismic evaluation of existing buildings. In particular, it focuses on the seismic behavior of lightly reinforced shear walls that are not designed to withstand earthquake actions. A shear strength envelope for the assessment of d ...
Reinforced concrete bridge deck slabs without shear reinforcement can be subjected to concentrated or distributed loads of important magnitude. Under these loads their structural response is not always ductile. In particular under concentrated loads their ...
Since decades traditional friction welding methods are applied industrially to metal and thermoplastic synthetics. Research showed that for different applications this method is promising for wood too. The process does not necessitate any additional materi ...
The steel slit panel–frame is a new system for seismic resistance of buildings. The steel slit panels are bolted to beams which are simply connected to the columns. The steel slit panels are steel plates with rows of vertical slits forming a series of flex ...