Assessment of mechanical properties in unirradiated and irradiated zircaloys and steels with non-standard tests and finite element calculations
Publications associées (173)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Simulations of nuclear reactor physics can disagree significantly from experimental evidence, even when the most accurate models are used. An important part of this bias from experiment is caused by nuclear data. The nuclear data have inherent uncertaintie ...
The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...
This chapter begins with a short overview of the historical development of the ferritic/martensitic steels for nuclear energy systems, followed by a section that outlines the numerous nuclear applications where this type of steels are currently used or for ...
The fracture behaviour of low-alloy reactor pressure vessel steels with various sulphur and phosphorus contents, different environmentally-assisted cracking (EAC) and temper embrittlement (TE) susceptibilities was evaluated by elastic plastic fracture mech ...
This report serves two purposes. The first is to introduce the linear Kalman filter and the unscented Kalman filter to readers who are unfamiliar with either or both. To this end, it contains an extensive explanation of these methods, including all equatio ...
A multi-physics solver for nuclear reactor analysis, named GeN-Foam (Generalized Nuclear Foam), has been developed by the Laboratory for Reactor Physics and System Behavior at the EPFL and at the Paul Scherrer Institut (Switzerland). The developed solver c ...
Elastic plastic fracture mechanics tests on different low-alloy reactor pressure vessel (RPV) steels in air and various simulated light water reactor environments revealed a clear, but moderate reduction of the fracture initiation resistance of RPV steels ...
The paper demonstrates the influence of uncertainties in microscopic nuclear data on the results of reactor simulations, both for stationary and transient states. It gives an overview on the methods in use for uncertainty and sensitivity analyses with resp ...
Spalling in tantalum has been observed in an experiment aiming at testing an antiproton production target prototype at CERN’s HiRadMat Facility. The experiment consisted in impacting 47 intense and high-energy proton beams onto a target equipped with ten c ...
The structural integrity of the reactor pressure vessel (RPV) of light water reactors (LWR) is of utmost importance regarding operation safety and lifetime. High-temperature water (HTW) and hydrogen absorbed from environment, in synergy with irradiation em ...