Influence of microstructure on oxygen transport in perovskite type membranes
Publications associées (53)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Tensile and creep rupture properties of crack-free CM247LC alloy, processed via laser powder bed fusion, have been characterised in this work at temperatures up to 1000 & DEG;C. The subject alloy matches or even exceeds the tensile performance of its direc ...
Fabric characteristics and shear deformation behaviour were analysed in four intact small-scale samples, including two disturbed and two undisturbed samples of naturally deposited sand from a shoal in the San Francisco Bay. Triaxial compression tests were ...
Sputter deposited Al(1-x)ScxN thin films with a Sc content from x = 0 to 43 at% are investigated by electron microscopy in order to study and explain the formation and growth of abnormally oriented grains (AOG). It is found that the latter did not nucleate ...
The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...
Transparent alumina is often processed with sintering additives such as, Y, La, and Mg, in order to limit its grain growth at high sintering temperatures. Usually, these additives segregate to the grain boundaries due to their larger cationic size than Al ...
Nanopowders are continuously under investigation as they open new perspectives in numerous fields. There are two main challenges to stimulating their development: sufficient low-cost, high throughput synthesis methods which lead to a production with well-d ...
The microstructures of alloys created via Additive Manufacturing (AM) can vary substantially from those present in cast or wrought products, due to the very rapid solidification associated with AM. While numerous studies have investigated the process-micro ...
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...
The paper by Karma and Tourret (this volume) in this special issue focuses on multiscale modeling approaches ranging from atoms to microstructure. In the present one, the most recent and significant modeling contributions dealing with the scale of solidifi ...
A detailed investigation was carried out to study the effect of volume fraction on microstructure evolution in segregation-free isotropic volume-conserved two-phase alloys. Large scale two-dimensional (2D) and three-dimensional (3D) simulations were perfor ...