Attenuation coefficientThe linear attenuation coefficient, attenuation coefficient, or narrow-beam attenuation coefficient characterizes how easily a volume of material can be penetrated by a beam of light, sound, particles, or other energy or matter. A coefficient value that is large represents a beam becoming 'attenuated' as it passes through a given medium, while a small value represents that the medium had little effect on loss. The SI unit of attenuation coefficient is the reciprocal metre (m−1).
Microscopie électronique en transmissionvignette|upright=1.5|Principe de fonctionnement du microscope électronique en transmission. vignette|Un microscope électronique en transmission (1976). La microscopie électronique en transmission (MET, ou TEM pour l'anglais transmission electron microscopy) est une technique de microscopie où un faisceau d'électrons est « transmis » à travers un échantillon très mince. Les effets d'interaction entre les électrons et l'échantillon donnent naissance à une image, dont la résolution peut atteindre 0,08 nanomètre (voire ).
Plasma parametersPlasma parameters define various characteristics of a plasma, an electrically conductive collection of charged particles that responds collectively to electromagnetic forces. Plasma typically takes the form of neutral gas-like clouds or charged ion beams, but may also include dust and grains. The behaviour of such particle systems can be studied statistically. All quantities are in Gaussian (cgs) units except energy and temperature which are in electronvolts.
DemodulationDemodulation is extracting the original information-bearing signal from a carrier wave. A demodulator is an electronic circuit (or computer program in a software-defined radio) that is used to recover the information content from the modulated carrier wave. There are many types of modulation so there are many types of demodulators. The signal output from a demodulator may represent sound (an analog audio signal), images (an analog video signal) or binary data (a digital signal).
Plancher chauffantUn plancher chauffant est un système de chauffage des bâtiments par le sol. L'énergie de chauffage produit par une chaudière est généralement transmise au plancher via un réseau circulant sous le plancher. Ce réseau est principalement hydraulique ou électrique. Les systèmes récents de plancher hydraulique sont dits basse température, car l'eau circule dans les tuyaux à une température moyenne comprise entre et . L'émission de chaleur par le sol intégrée au bâtiment n'est pas nouvelle.
Plasma-facing materialIn nuclear fusion power research, the plasma-facing material (or materials) (PFM) is any material used to construct the plasma-facing components (PFC), those components exposed to the plasma within which nuclear fusion occurs, and particularly the material used for the lining the first wall or divertor region of the reactor vessel. Plasma-facing materials for fusion reactor designs must support the overall steps for energy generation, these include: Generating heat through fusion, Capturing heat in the first wall, Transferring heat at a faster rate than capturing heat.
Résonance cyclotronLa résonance cyclotron électronique (ECR pour electron cyclotron resonance) est un phénomène observé aussi bien en physique des plasmas qu'en physique de la matière condensée. Un électron dans un champ magnétique statique et uniforme se déplace sur un cercle en raison de la force de Lorentz. Le mouvement circulaire peut être superposé à un mouvement uniforme axial, résultant en une hélice, ou avec un mouvement uniforme perpendiculaire au champ, par exemple, en présence d'un champ électrique ou gravitationnel, résultant en une cycloïde.
Airy wave theoryIn fluid dynamics, Airy wave theory (often referred to as linear wave theory) gives a linearised description of the propagation of gravity waves on the surface of a homogeneous fluid layer. The theory assumes that the fluid layer has a uniform mean depth, and that the fluid flow is inviscid, incompressible and irrotational. This theory was first published, in correct form, by George Biddell Airy in the 19th century.
Décharge luminescenteUne décharge luminescente est un plasma formé par le passage d'un courant électrique de tension allant de à plusieurs kilovolts, au travers un gaz à basse pression, tel l'argon ou un autre gaz noble. Ce phénomène est utilisé dans des produits commerciaux tels la lampe néon et l'écran à plasma, ainsi que dans les sciences physiques de l'état plasma et la chimie analytique. Les premiers appareils basés sur ce phénomène ont été construits par Heinrich Geissler à partir de 1857.
Cyclotron resonanceCyclotron resonance describes the interaction of external forces with charged particles experiencing a magnetic field, thus already moving on a circular path. It is named after the cyclotron, a cyclic particle accelerator that utilizes an oscillating electric field tuned to this resonance to add kinetic energy to charged particles. The cyclotron frequency or gyrofrequency is the frequency of a charged particle moving perpendicular to the direction of a uniform magnetic field B (constant magnitude and direction).