Correcting Jackknife Confidence Intervals

This paper presents a method for constructing confidence intervals using the jackknife. Asymptotic expansions are used to assess and reduce the skewness. It is proved that, although the error in the coverage rate remains of order O(1/n) for two-sided intervals, the main term due to the skewness in the distribution is eliminated, which constitute an improvement to the normal approximation that is important in the context of small samples. Several simulations are presented, with different distributions and functionals, and compared to the empirical accuracy obtained with a normal approximation. It is observed that our method produces in many cases a better empirical accuracy than the intervals due to a normal approximation, without requiring any knowledge on the underlying distribution.

Computer-intensive statistical methods

Diego Kuonen

The saddlepoint approximation was introduced into statistics in 1954 by Henry E. Daniels. This basic result on approximating the density function of the sample mean has been generalized to many situations. The accuracy of this approximation is very good, particularly in the tails of the distribution and for small sample sizes, compared with normal or Edgeworth approximation methods. Before applying saddlepoint approximations to the bootstrap, this thesis will focus on saddlepoint approximations for the distribution of quadratic forms in normal variables and for the distribution of the waiting time in the coupon collector's problem. Both developments illustrate the modern art of statistics relying on the computer and embodying both numeric and analytic approximations. Saddlepoint approximations are extremely accurate in both cases. This is underlined in the first development by means of an extensive study and several applications to nonparametric regression, and in the second by several examples, including the exhaustive bootstrap seen from a collector's point of view. The remaining part of this thesis is devoted to the use of saddlepoint approximations in order to replace the computer-intensive bootstrap. The recent massive increases in computer power have led to an upsurge in interest in computer-intensive statistical methods. The bootstrap is the first computer-intensive method to become widely known. It found an immediate place in statistical theory and, more slowly, in practice. The bootstrap seems to be gaining ground as the method of choice in a number of applied fields, where classical approaches are known to be unreliable, and there is sustained interest from theoreticians in its development. But it is known that, for accurate approximations in the tails, the nonparametric bootstrap requires a large number of replicates of the statistic. As this is time-intensive other methods should be considered. Saddlepoint methods can provide extremely accurate approximations to resampling distributions. As a first step I develop fast saddlepoint approximations to bootstrap distributions that work in the presence of an outlier, using a saddlepoint mixture approximation. Then I look at robust M-estimates of location like Huber's M-estimate of location and its initially MAD scaled version. One peculiarity of the current literature is that saddlepoint methods are often used to approximate the density or distribution functions of bootstrap estimators, rather than related pivots, whereas it is the latter which are more relevant for inference. Hence the aim of the final part of this thesis is to apply saddlepoint approximations to the construction of studentized confidence intervals based on robust M-estimates. As examples I consider the studentized versions of Huber's M-estimate of location, of its initially MAD scaled version and of Huber's proposal 2. In order to make robust inference about a location parameter there are three types of robustness one would like to achieve: robustness of performance for the estimator of location, robustness of validity and robustness of efficiency for the resulting confidence interval method. Hence in the context of studentized bootstrap confidence intervals I investigate these in more detail in order to give recommendations for practical use, underlined by an extensive simulation study.

EPFL2001

Vieillissement et fiabilité des parcs de poteaux bois des réseaux de lignes aériennes

Yann Benoit

The reliability of new overhead electric and telecommunication lines depends principally on the quality of their support structures. These structures are generally made of wood, metal or concrete. The complexity of a natural substance such as wood requires a thorough analysis of the various factors that influence its overall quality. In the case of wood poles, such factors include initial forest growth pattern, the species of wood and its preservative treatment, ageing characteristics, and its various mechanical defects such as knots, cracks etc. The accumulation of knowledge on the effect of the various variables that contribute to the overall quality of a wood support structure permits an optimum use of such a resource. For example, less variability and higher strength of wood support structures permits optimum loading and spacing between structures, thus reducing the number needed in a specific length of an overhead line. If one assumes that in Western Europe 1 wood pole is employed for every 2 inhabitants, and that this proportion increases in less densely populated countries such as the US and Scandinavia, the economics of optimum use of wood as a resource soon become apparent. In less developed countries, the proportions and the economics vary depending on the natural resources such as wood that they employ. The goal of this research is to establish, thanks to non destructive evaluations, a general ageing probabilistic law of the wooden pole based on two distinguished laws: one on the new pole in studying the influence of a grading of the bad elements based on a normal law: "left-truncation of a normal distribution", point 1; and another one based on the in-field wooden pole in exploiting the different parameters such as: the age of the pole, its chemical treatment, its species, its knots etc. in order to define the pole's damage law, point 2. Statistical distribution law of the new wooden pole after grading by non destructive sorting (ultrasounds) of the high mechanical performances supports: This new distribution law is a Gaussian law or evolves to a Log or Weibull's law with 3 parameters according to the inspected species. This grading allows a revalorization of the properties of the new poles and of the design values while guaranteeing an index of reliability required by the design standards, or in improving directly this nominal reliability (economic gain and reliability gain). Statistical distribution law of an aged in-field population (20-50 years old) approached by a bi-modal law which depends on: The distribution law of the new component (see point 1) and its minimal extreme law, which is asymmetrical, for an observation on 50 years. The statistical distribution at the time t of the residual mechanical performances of a group of supports making a local net, evaluated by non destructive methods. The non destructive evaluation is based on the measurements of physical variables (density, biological moisture content) and some descriptive variables from natural origins (diameter, knots, cracks...) and from accidental origins (diameter reduction, lightning cracks...). The statistical distribution at the time t is then obtained on the basis of a model of multivariate non destructive evaluation, generalized to the whole of species and treatments. This model is the other concrete goal to reach in this thesis. As a conclusion, the research demonstrates the influence and the interaction of the new pole grading (distribution at t0) on the modelisation of the distribution at ti (multivariate non destructive model). The data used for the mentioned modelisations come from a significant international database with a large amount of inspected wood poles and with studied cases. This database is the synthesis of about 15 years of research and development leaded by IBOIS-EPFL and its international partners. The probabilistic approaches are then validated by a huge database allowing thus to be directly exploitable. On this basis, all the standards dealing with the new poles and dealing with the controls and maintenances of a wooden pole networks, could be re-examined for a double gain: Concerning the economy: by increasing the capacity of the new poles profiting of an objective quality assurance, and by increasing the life time of the in-field pole, in knowing how to purge only the ones which are under the critical threshold of damage Concerning the reliability: by increasing the reliability of the network from the stage "new pole", by eliminating the weakest components, and by maintaining this reliability during all the life time of the network thanks to a cyclic preventive maintenance (every 5 to 8 years) and the replacement of only the weakened poles.

EPFL2004

Statistical methods for insect choice experiments

Ingrid Ricard

Olfactometer experiments are used to determine the effect of odours on the behaviour of organisms such as insects or nematodes, and typically result in data comprising many groups of small counts, overdispersed relative to the multinomial distribution. Overdispersion reflects a lack of independence or heterogeneity among individuals and can lead to statistics having larger variances than expected and possible losses of efficiency. In this thesis, some distributions which consist of generalisations of the multinomial distribution have been developed. These models are based on non-homogeneous Markov chain theory, take the overdispersion into account, and potentially provide a physical interpretation of the overdispersion seen in olfactometer data. Some inference aspects are considered, including comparison of the asymptotic relative efficiencies of three different sampling schemes. The fact that the empirical distributions well approximate the corresponding asymptotic distributions is checked. Observable differences in parameter estimates between data generated under different hypotheses are also studied. Finally, different models intended to shed light on various aspects of the data and/or the experiment procedure, are applied to three real olfactometer datasets.