Mechanical analysis of ultrathin oxide coatings on polymer substrates in-situ in a scanning electron microscope
Publications associées (65)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This paper presents numerical analysis of an in-plane resonant nano-electro-mechanical (NEM) sensor based on mass-detection principle using a 3D FEM electromechanical simulation combined with a NEM/MOS hybrid circuit simulation. The self-assembled linker m ...
In order to track single superparamagnetic microbeads serving as markers in biomolecular assays, high-sensitivity, sub-micron magnetic sensors which can be integrated onto Lab-on-a-chip platforms are needed. This thesis studies the realization and characte ...
Focused Electron Beam Induced Processing (FEBIP) is a technique used for etching and deposition of micro- and nano-structures using a focused electron beam. FEBIP is commonly carried out in a Scanning Electron Microscope (SEM) with a Gas Injection System ( ...
Nanowire superconducting single photon detectors (SSPDs) [1] are characterized by very high sensitivity in the near infrared (detection efficiency η up to 30%, for a dark count rate DK of few Hz), speed (up to ∼1 GHz repetition rate) and time resolution (j ...
New dedicated coating processes which are based on the well-known LPPS (TM) technology but operating at lower work pressure (100 Pa) are being actively developed. These hybrid technologies contribute to improve the efficiencies in the turbine industry such ...
The influence of oxygen content on the properties of cathodic arc-deposited AlCr(OxN1-x) coatings has been studied. All samples were prepared in a nitrogen-rich mixture of N-2 and O-2 at 550 degrees C using lateral rotating arc cathodes (LARC) technology t ...
Mechanical properties of nanostructures could be remarkably different from their bulk counterparts owing to scale effects, which have attracted considerable research interest in recent years. However, nanomechanics studies are hindered by the difficulties ...
Aluminum rich oxynitride thin films were prepared using pulsed direct current (DC) magnetron sputtering from an Al95.5Cr2.5Si2 (at.%) target. Two series of films were deposited at 400 degrees C and 650 degrees C by changing the O-2/(O-2 + N-2) ratio in the ...
Lithium niobate is a key material for photonics with applications in optical modulators and light frequency converters. Present lithium niobate optical devices are realized in bulk lithium niobate single crystals while interests in higher integration and a ...
Evaluation of interfacial toughness of sub-micron-thickness layers deposited on a ductile substrate is a challenging task which has motivated different experimental approaches Fragmentation testing was used in the present study as a means of interface char ...