Publication

The heterojunction parameters from a microscopic point of view

Giorgio Margaritondo
1983
Article de conférence
Résumé

The use of surface-sensitive experimental techniques has produced in recent years important advances in the understanding of the microscopic nature of heterojunction parameters. In particular, valence band discontinuity has been measured for a large number of interfaces by photoemission spectroscopy and the results identify the LCAO approach by Harrison (1977) as the best first-order calculation of this parameter. Local effects, however, limit the accuracy of the estimate to 0.2-0.3 eV. Some evidence has been obtained to show that surface defects play an important role in the interface Fermi-level pinning for heterojunctions involving III-V compounds, and therefore in the establishment of the built-in potential

À propos de ce résultat
Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.
Concepts associés (32)
Niveau de Fermi
Le niveau de Fermi est une caractéristique propre à un système qui traduit la répartition des électrons dans ce système en fonction de la température. La notion de niveau de Fermi est utilisée en physique et en électronique, notamment dans le cadre du développement des composants semi-conducteurs. Concrètement, le niveau de Fermi est une fonction de la température mais il peut être considéré, en première approximation, comme une constante, laquelle équivaudrait alors au niveau de plus haute énergie occupé par les électrons du système à la température de .
Metal–semiconductor junction
In solid-state physics, a metal–semiconductor (M–S) junction is a type of electrical junction in which a metal comes in close contact with a semiconductor material. It is the oldest practical semiconductor device. M–S junctions can either be rectifying or non-rectifying. The rectifying metal–semiconductor junction forms a Schottky barrier, making a device known as a Schottky diode, while the non-rectifying junction is called an ohmic contact.
Transistor à effet de champ à grille métal-oxyde
thumb|right|235px|Photographie représentant deux MOSFET et une allumette Un transistor à effet de champ à grille isolée plus couramment nommé MOSFET (acronyme anglais de metal-oxide-semiconductor field-effect transistor — qui se traduit par transistor à effet de champ à structure métal-oxyde-semiconducteur), est un type de transistor à effet de champ. Comme tous les transistors, le MOSFET module le courant qui le traverse à l'aide d'un signal appliqué sur son électrode nommée grille.
Afficher plus
Publications associées (36)

Identification and thermal healing of focused ion beam-induced defects in GaN using off-axis electron holography

Nicolas Grandjean, Jean-François Carlin, Raphaël Butté, Yi Wang

Thermal healing of focused ion beam-implanted defects in GaN is investigated by off-axis electron holography in TEM. The data reveal that healing starts at temperatures as low as about 250 degrees C. The healing processes result in an irreversible transiti ...
Bristol2024

Correlating chemical and electronic states from quantitative photoemission electron microscopy of transition-metal dichalcogenide heterostructures

Andras Kis, Dumitru Dumcenco, Olivier Renault, Dmitrii Unuchek, Hokwon Kim, Nicolas Chevalier

Vertical heterostructures of MoS2 and WSe2 layers are studied by spectroscopic photoemission electron microscopy as an effective technique for correlating chemical and electronic states at the micrometer scale. Element-specific, surface-sensitive images re ...
2021

Reduction of Fermi level pinning at Cu-BP interfaces by atomic passivation

Xiao Zhou, Cheng Chen, Pengfei Ou

Black phosphorus (BP) is a semiconducting material with a direct finite band gap in its monolayer, attracting intense attention for its application in field-effect transistors. However, strong Fermi level pinning (FLP) has been observed for contacts betwee ...
2019
Afficher plus

Graph Chatbot

Chattez avec Graph Search

Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.

AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.