Ductility of adhesively bonded timber joints

Publications associées (28)

À propos
Confidentialité
Mentions légales

Graph Chatbot

Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes

Aurelio Muttoni, Miguel Fernández Ruiz, Qianhui Yu

The increasing usage of nonlinear analyses for the design of reinforced concrete structures and the necessity of codes of practice to provide a consistent safety format for them is one of the challenges that new generations of codes of practice are facing. ...

ELSEVIER SCI LTD2022

The Role of the Composite Floor System and Framing Action in the Seismic Performance of Composite Steel Moment-Resisting Frames

Hammad El Jisr

With the advent of performance-based earthquake engineering (PBEE), the need for reliable prediction of earthquake-induced collapse of structures is essential. Despite the significant progress that has been made towards this goal, there are several hurdles ...

EPFL2022

Experimental investigation of dowel action using advanced measurement techniques

Aurelio Muttoni, Marko Pejatovic

Existing shear-cracked structures need to be reliably verified in order to avoid redundant interventions. Code provisions often raise shear safety and/or fatigue life concerns of the reinforcement subjected to stress concentrations due to cyclic dowel acti ...

2022

Numerical simulations of retrofitting interventions on timber floors in unreinforced masonry

Katrin Beyer, Igor Tomic, Ivana Bozulic

Unreinforced masonry buildings with flexible timber floors are amongst the most vulnerable building typologies for seismic loading. Though flexible diaphragms play a role in the seismic behaviour of unreinforced masonry buildings, the impact of the connect ...

2022

Modelling of in-plane seismic behaviour of one-way steel or timber jack arch floors in existing buildings

Savvas Saloustros

The type of floor system has a decisive role in the seismic performance of unreinforced masonry buildings. The in-plane stiffness of the floors has to be adequately represented in the numerical modelling of existing buildings, as it can influence their sei ...

2022

Design of slender and squat reinforced concrete members with shear reinforcement

Aurelio Muttoni, Miguel Fernández Ruiz, Marko Pejatovic

As proposed in several design standards for structural concrete, including Eurocode 2 (EN:1992-1-1:2004) and fib's Model Code 2010, the shear design of slender members with shear reinforcement can be performed by means of consistent models based on suitabl ...

ERNST & SOHN2022

Inverse Analysis of R-UHPFRC Beams to Determine the Flexural Response under Service Loading and at Ultimate Resistance

Eugen Brühwiler, Emmanuel Denarié, Bartlomiej Wojciech Sawicki

Ultra high performance fiber reinforced cementitious composites (UHPFRCs) have demonstrated their outstanding efficiency as structural materials. Determination of the bending resistance of members combining UHPFRC with steel reinforcement bars (R-UHPFRC) u ...

2022

Re:Crete - A Footbridge made of Reused Concrete Blocks

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Célia Marine Küpfer, Jan Friedrich Georg Brütting, Julie Rachel Devènes

Today, concrete is the most widely used construction material worldwide. Strong, versatile, durable, and vector of economic development, this exceptional material is also the principal cause of greenhouse-gas emissions, material depletion and waste generat ...

Asociación Española de Ingeniería Estructura2022

Page 3 sur 3

Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes

Aurelio Muttoni, Miguel Fernández Ruiz, Qianhui Yu

ELSEVIER SCI LTD2022

The Role of the Composite Floor System and Framing Action in the Seismic Performance of Composite Steel Moment-Resisting Frames

Hammad El Jisr

EPFL2022