Publications associées à Micropat SA

FLO:RE – A new floor system made of reused reinforced concrete and steel elements

Corentin Jean Dominique Fivet, Numa Joy Bertola, Maléna Bastien Masse, Célia Marine Küpfer

Carefully extracting reinforced concrete (RC) elements from soon-to-be demolished structures and reusing them as load-bearing components is an emerging circular low-carbon alternative to building new structures. As floor construction typically accounts for ...

IABSE2024

Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing

Eric Boillat, Alexandre Masserey, Bastian Meylan

Laser polishing (LP) is a process that allows a significant reduction of the surface roughness of a metal workpiece via re-melting a shallow layer of material. However, the practical use of LP is limited due to the difficulty of satisfying the high surface ...

MDPI2022

APT/TEM characterization of the element segregation in ferritic/martensitic steels after irradiation in SINQ

Lijuan Cui

Ferritic /martensitic (FM) steels are among the most important materials in various nuclear applications. As radiation-induced segregation (RIS) is one of the major factors for embrittlement of nuclear materials, thereofre it is essential to study the RIS ...

EPFL2021

Enhancement of riveted steel bridges by adding a trough in UHPFRC acting in composite action

Eugen Brühwiler

Riveted railway bridges are commonly considered as being “old”, having fatigue damage and are therefore replaced. While this practice should be by now obsolete by using novel engineering methods like structural monitoring, prolongation of the service durat ...

Taylor & Francis2021

Solute-dislocation interactions and creep-enhanced Cu precipitation in a novel ferritic-martensitic steel

Roland Logé, Cyril Cayron, Bo Xiao

G115 steel has gained a growing interesting recently for its use in next-generation ultra-supercritical power plant applications. Due to the high densities of dislocations and lath martensite boundaries in G115 steel, interactions between solutes and dislo ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels

William Curtin, Helena Van Swygenhoven, Francesco Maresca, Efthymios Polatidis

New-generation multi-phase martensitic steels derive their high strength from the body-centered cubic (BCC) phase and high toughness from transformation of the metastable face-centered cubic (FCC) austenite that transforms into martensite upon loading. In ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Diffraction artefacts from twins and stacking faults, and the mirage of hexagonal, polytypes or other superstructures

Cyril Cayron

Recently, a hexagonal phase has been reported in high carbon steels in several studies. Here, we show that the electron microscopy results used in these studies were erroneously interpreted. The extra-spots in the diffraction patterns and the odd contrasts ...

2020

Multiaxial fatigue analysis of high-strength steel welded joints using generalized local approaches

Martin Antonio René Garcia

The objective of this thesis is to improve methods for predicting the fatigue life, multiaxial or not, of mild- and more particularly high-strength steels using local approaches that have the capacity to be applicable to almost any cases, hence the term ge ...

EPFL2020

Advanced analytical electron microscopy applied to Solid Oxide Cell materials and their degradation

Stéphane François Jean Poitel

Electron microscopy offers a wide range of techniques to study materials. Environmental Scanning Electron Microscopy (ESEM), in particular, allows the characterisation of samples at high-temperature using a laser heating stage, and under various gaseous at ...

EPFL2020

Variant selection in martensitic steels

Annick Pauline Baur

The martensitic phase transformation in steel is one of the most famous solid state transformation because of its contribution in the development of the modern industry. This transformation from a face-centered cubic (FCC) high temperature phase, called th ...

EPFL2019