Are you an EPFL student looking for a semester project?
Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.
In nuclear safety, most severe accident scenarios lead to the presence of fission products in aerosol form in the closed containment atmosphere. It is important to understand the particle depletion process to estimate the risk of a release of radioactivity to the environment should a containment break occur. As a model for the containment, we use the three-dimensional differentially heated cavity (DHC) problem. DHC is a cubical box with a hot wall and a cold wall on vertical opposite sides. On the other walls of the cube we have adiabatic boundary conditions. For the velocity field the no-slip boundary condition is valid. The flow of the air in the cavity is described by the Boussinesq equations. Complex flow patterns develop and the flow characteristics depend on the non-dimensional Rayleigh and Prandtl numbers. The predominant flow type in the DHC is a turbulent natural convection flow. This work aims at reaching Rayleigh numbers and turbulent levels as high as possible given the available computational resources. The method used to simulate the turbulent flow is the large eddy simulation (LES) where the dynamics of the large eddies is resolved by the computational grid and the small eddies are modelled by the introduction of subgrid scale quantities using a filter function. Numerically, the LES equations are discretized by the spectral element method. Particle trajectories are computed using the Lagrangian particle tracking method, including the relevant forces (drag, gravity, thermophoresis). Four different particle sets with each set containing one million particles and diameters of 10 μm, 15 μm, 25 μm and 35 μm are simulated. The complexity and the size of the large three-dimensional problem requires the use of massively parallel supercomputers. Spectral element methods are naturally suitable for parallelisation by distributing the elements among the processors. For the Lagrangian particle tracking we use a method where equal numbers of particles are assigned to every processor. The flow field is broadcast and every particle processor tracks the assigned particles, a procedure which leads to a perfect load balancing. Simulation results for the flow field and particle sizes from 15 μm to 35 μm at a Rayleigh number of 109 are compared to previous results from a direct numerical simulation. First order statistics of the LES flow fields are in very good agreement with the direct numerical simulation while the agreement of second order moments is fair. Also the turbulent structures associated to the maximum of turbulent kinetic energy production are correctly reproduced. Particle statistics in the LES and the direct numerical simulation were similar and the settling rates practically identical. Contrary to previous particle simulations in LES, it was found that no model was necessary for the influence of the unresolved flow scales on the particle motions. This can be explained, because the important settling mechanism is through gravity and particle deposition at the walls by turbophoresis is negligible.
Paolo Ricci, Joaquim Loizu Cisquella, António João Caeiro Heitor Coelho, Maurizio Giacomin