Publication

Fiber-Shaped Electronic Devices

Mohammad Khaja Nazeeruddin
2021
Journal paper
Abstract

Textile electronics embedded in clothing represent an exciting new frontier for modern healthcare and communication systems. Fundamental to the development of these textile electronics is the development of the fibers forming the cloths into electronic devices. An electronic fiber must undergo diverse scrutiny for its selection for a multifunctional textile, viz., from the material selection to the device architecture, from the wearability to mechanical stresses, and from the environmental compatibility to the end-use management. Herein, the performance requirements of fiber-shaped electronics are reviewed considering the characteristics of single electronic fibers and their assemblies in smart clothing. Broadly, this article includes i) processing strategies of electronic fibers with required properties from precursor to material, ii) the state-of-art of current fiber-shaped electronics emphasizing light-emitting devices, solar cells, sensors, nanogenerators, supercapacitors storage, and chromatic devices, iii) mechanisms involved in the operation of the above devices, iv) limitations of the current materials and device manufacturing techniques to achieve the target performance, and v) the knowledge gap that must be minimized prior to their deployment. Lessons learned from this review with regard to the challenges and prospects for developing fiber-shaped electronic components are presented as directions for future research on wearable electronics.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (32)
Optical fiber
An optical fiber, or optical fibre in Commonwealth English, is a flexible, transparent fiber made by drawing glass (silica) or plastic to a diameter slightly thicker than that of a human hair. Optical fibers are used most often as a means to transmit light between the two ends of the fiber and find wide usage in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths (data transfer rates) than electrical cables.
Multi-mode optical fiber
Multi-mode optical fiber is a type of optical fiber mostly used for communication over short distances, such as within a building or on a campus. Multi-mode links can be used for data rates up to 100 Gbit/s. Multi-mode fiber has a fairly large core diameter that enables multiple light modes to be propagated and limits the maximum length of a transmission link because of modal dispersion. The standard G.651.1 defines the most widely used forms of multi-mode optical fiber.
Solar cell
A solar cell, or photovoltaic cell, is an electronic device that converts the energy of light directly into electricity by the photovoltaic effect, which is a physical phenomenon. It is a form of photoelectric cell, defined as a device whose electrical characteristics, such as current, voltage, or resistance, vary when exposed to light. Individual solar cell devices are often the electrical building blocks of photovoltaic modules, known colloquially as solar panels.
Show more
Related publications (34)

Accounting for Optical Generation in the Quasi-Neutral Regions of Perovskite Solar Cells

Jean-Michel Sallese, Farzan Jazaeri, Parnian Ferdowsi, Michael Saliba

Predicting the performance of solar cells though analytical models is important for the theory-guided optimization of these devices. Earlier models neglect the impact of the optical generation in the quasi-neutral regions of a perovskite solar cell. Here, ...
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Soft functional fibers for mechanical sensing and actuation

Andreas Leber

The measurement and generation of mechanical deformations is a key functionality in health monitoring, human-machine interaction, and soft robotics. However, current methods typically rely on small and hard transducers, which result in poor performance, cu ...
EPFL2021

Linking simulation and synthesis of nickel oxide hole-selective contacts for silicon heterojunction solar cells

Christophe Ballif, Mathieu Gérard Boccard, Jan Haschke, Angela Nicole Fioretti, Rachel Emma Woods-Robinson

In silicon heterojunction (SHJ) solar cells, one factor limiting efficiency is "parasitic absorption" from amorphous silicon (a-Si) at the front surface. Thus, discovery of a transparent hole-selective contact to replace p-type a-Si is a promising area of ...
IEEE2020
Show more
Related MOOCs (7)
IoT Systems and Industrial Applications with Design Thinking
The first MOOC to provide a comprehensive introduction to Internet of Things (IoT) including the fundamental business aspects needed to define IoT related products.
Micro and Nanofabrication (MEMS)
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.
Microstructure Fabrication Technologies I
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.