Beam bridges are the simplest structural forms for bridge spans supported by an abutment or pier at each end. No moments are transferred throughout the support, hence their structural type is known as simply supported.
The simplest beam bridge could be a log (see log bridge), a wood plank, or a stone slab (see clapper bridge) laid across a stream. Bridges designed for modern infrastructure will usually be constructed of steel or reinforced concrete, or a combination of both. The concrete elements may be reinforced, prestressed or post-tensioned. Such modern bridges include girder, plate girder, and box girder bridges, all types of beam bridges.
Types of construction could include having many beams side by side with a deck across the top of them, to a main beam either side supporting a deck between them. The main beams could be I-beams, trusses, or box girders. They could be half-through, or braced across the top to create a through bridge.
Because no moments are transferred, thrust (as from an arch bridge) cannot be accommodated, leading to innovative designs, such as lenticular trusses and bow string arches, which contain the horizontal forces within the superstructure.
Beam bridges are not limited to a single span. Some viaducts such as the Feiyunjiang Bridge in China have multiple simply supported spans supported by piers. This is opposed to viaducts using continuous spans over the piers.
Beam bridges are often only used for relatively short distances because, unlike truss bridges, they have no built in supports. The only supports are provided by piers. The farther apart its supports, the weaker a beam bridge gets. As a result, beam bridges rarely span more than . This does not mean that beam bridges are not used to cross great distances; it only means that a series of beam bridges must be joined together, creating what is known as a continuous span.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Ce cours traite les principaux aspects de la conception et du dimensionnement des ponts en béton armé et précontraint. L'accent est mis sur les ponts poutres. Etude des aspects suivants : optimisation
Introduction à la conception et au dimensionnement des ponts en béton armé et précontraint, ainsi qu'en construction mixte. Ce cours porte sur le choix du type de pont, des principales dimensions des
The course deals with the design of precast reinforced concrete structures, both for bridges and for buildings.
The course is focused in learning by projects supplemented by some lectures by the teac
This paper examines the reliability of welded stud shear connectors for steel-concrete composite bridge girders. A finite element model of a simply-supported bridge was created featuring link connector elements representing the shear studs between beam and ...
A bridge is a structure built to span a physical obstacle (such as a body of water, valley, road, or railway) without blocking the way underneath. It is constructed for the purpose of providing passage over the obstacle, which is usually something that is otherwise difficult or impossible to cross. There are many different designs of bridges, each serving a particular purpose and applicable to different situations.
Eight years after the last visit of Bernardo Secchi to Brazil, the new cycle of online seminars Prima Lezione: Bernardo Secchi and the project of the contemporary city will be a posthumous tribute to the Italian professor, given his important contribution ...
The forms of U-shaped UHPFRC beams have not been investigated for the highway footbridge. Compared with the traditional section forms, the U-shaped UHPFRC beams can reduce the material consumption under the condition of providing the same bearing capacity. ...