A tailplane, also known as a horizontal stabiliser, is a small lifting surface located on the tail (empennage) behind the main lifting surfaces of a fixed-wing aircraft as well as other non-fixed-wing aircraft such as helicopters and gyroplanes. Not all fixed-wing aircraft have tailplanes. Canards, tailless and flying wing aircraft have no separate tailplane, while in V-tail aircraft the vertical stabiliser, rudder, and the tail-plane and elevator are combined to form two diagonal surfaces in a V layout.
The function of the tailplane is to provide stability and control. In particular, the tailplane helps adjust for changes in position of the centre of pressure or centre of gravity caused by changes in speed and attitude, fuel consumption, or dropping cargo or payload.
The tailplane comprises the tail-mounted fixed horizontal stabiliser and movable elevator. Besides its planform, it is characterised by:
Number of tailplanes - from 0 (tailless or canard) to 3 (Roe triplane)
Location of tailplane - mounted high, mid or low on the fuselage, fin or tail booms.
Fixed stabiliser and movable elevator surfaces; movable stabiliser and movable elevator (e.g. Boeing 737); or a single combined stabilator (e.g. General Dynamics F-111 Aardvark)
Some locations have been given special names:
Cruciform: mid-mounted on the fin (Hawker Sea Hawk, Sud Aviation Caravelle)
T-tail: high-mounted on the fin (Gloster Javelin, Boeing 727)
A wing with a conventional aerofoil profile makes a negative contribution to longitudinal stability. This means that any disturbance (such as a gust) which raises the nose produces a nose-up pitching moment which tends to raise the nose further. With the same disturbance, the presence of a tailplane produces a restoring nose-down pitching moment, which may counteract the natural instability of the wing and make the aircraft longitudinally stable (in much the same way a weather vane always points into the wind).
The longitudinal stability of an aircraft may change when it is flown "hands-off"; i.e.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
A flying wing is a tailless fixed-wing aircraft that has no definite fuselage, with its crew, payload, fuel, and equipment housed inside the main wing structure. A flying wing may have various small protuberances such as pods, nacelles, blisters, booms, or vertical stabilizers. Similar aircraft designs, that are not technically flying wings, are sometimes casually referred to as such. These types include blended wing body aircraft and lifting body aircraft, which have a fuselage and no definite wings.
A conventional fixed-wing aircraft flight control system (AFCS) consists of flight control surfaces, the respective cockpit controls, connecting linkages, and the necessary operating mechanisms to control an aircraft's direction in flight. Aircraft engine controls are also considered as flight controls as they change speed. The fundamentals of aircraft controls are explained in flight dynamics. This article centers on the operating mechanisms of the flight controls.
A fixed-wing aircraft is a heavier-than-air flying machine, such as an airplane, which is capable of flight using wings that generate lift caused by the aircraft's forward airspeed and the shape of the wings. Fixed-wing aircraft are distinct from rotary-wing aircraft (in which the wings form a rotor mounted on a spinning shaft or "mast"), and ornithopters (in which the wings flap in a manner similar to that of a bird).
Since the collapse of the Tacoma Narrows Bridge more than 70 years ago suppressing wind-induced instabilities has been a key aspect of the design of long-span bridges. The intensive experimental and theoretical research in wind engineering allowed research ...
EPFL2016
,
A junctionless Nano-Electro-Mechanical (NEM) resonator, comprising a highly doped conductive channel (4) connecting a drain (9) and a source (10) electrode and movably fixed by at least two ends (11, 11') acting as said source and drain electrodes, respect ...
2014
, , , ,
The aerodynamic designs of winged drones are optimized for specific flight regimes. Large lifting surfaces provide maneuverability and agility but result in larger power consumption, and thus lower range, when flying fast compared with small lifting surfac ...