Swiss, Born 19.2.1954
1973-78 ETH Zurich, M.S. in Electrical Engineering
1979-84 Teaching Assistant, Doctorate Student at ETH (Inst. of Mechanics)
1984 Ph.D. thesis in Mechatronics (magnetic bearings, Prof. G. Schweitzer)
1985-87 Research Engineer at Hitachi Ltd, Japan, Mechanical Engineering Research Laboratory;
1987 Invited researcher at the Tokyo Institute of Technology (Precision Mechatronics, Prof. K. Ono)
1988-91 Lecturer and Senior Assistant at ETH ; co-foundation of MECOS-Traxler AG
1991-95 Toshiba Chair of "Intelligent Mechatronics" and then regular Associate Professor at The University of Tokyo (Institute of Industrial Science)
1995-present Full Professor at EPFL Lausanne on microrobotics, biomedical robotics;
2000 Co-founder of xitact SA, Morges (robotic surgery instrumentation & simulators)
2002-2006 President Conference of Professors and Lecturers of EPFL, member of Assemblée de l'Ecole
2006 Chairman of ISMB10 (10th International Symposium on Magnetic Bearings, Martigny, Switzerland)
2006 Nomination as member of the Swiss Academy of Technical Sciences (SATW)
Dr. Christophe Moser is
Associate Professor of Microengineering and Industrial Relations
at the Swiss Federal Institute of Technology in Lausanne. He was the co-founder and CEO of
Ondax,Inc
for ten years prior to joining EPFL. During this decade, he raised $15 million from corporate and venture capital sources to fund volume production of thick holographic components in glass and develop devices enabled by these components such as tunable add-drop multiplexers for telecommunications, ultra-narrowband notch filters for low frequency Raman systems, high power semi-conductor frequency-narrowed pumps for fiber lasers, single frequency fixed and tunable lasers for sensing and femtosecond pulse compressors for micro-machining applications. Dr. Moser has a Ph.D. in Electrical Engineering from the California Institute of Technology, a minor in finance and a bachelor degree in Physics from EPFL.
He is the co-inventor of 24 patents, 14 peer reviewed scientific publications, 9 IEEE proceedings and a book chapter.
Private interests include tennis, running, ski, basketball and family excursions.
2010: Associate Professor, EPFL, faculty
Science Technique Ingenieur.
2000-2010: co-founder, CEO Ondax, Inc.
1995-2000: Graduate Research Assistant,
California Institute of Technology.
1993-1995: Engineering Project manager ,
TESA.
1988-1993: Bachelor candidate in Physics, EPFL.
MAIN PUBLICATIONS:
Moser C., Havermeyer F,.Ultra-narrowband tunable laserline notch filter, Appl. Phys. B, 95 (3), pp 597-601, 2009.
Moser C. ,Ho L., Havermeyer F,. Self-aligned Non-dispersive External Cavity Tunable Laser, 16 (21), 16691-16696 Optics Express, 2008.
Steckman, GJ , Moser C. et al. Volume holographic grating wavelength stabilized laser diodes, IEEE J. Of Selected Topics in Quantum Electronics, (13), 672-678, 2007.
Buse K, Havermeyer F, Liu W., Moser C, Psaltis D. Holographic Filters , Book Chapter Photorefractive Materials and their Applications, 2005.
Havermeyer, F; Liu, WH; Moser, C, et al. Volume holographic grating-based continuously tunable optical filter , Opt. Eng. 43 (9), 2017-2021, 2004.
Moser C., Maravic I., Schupp B., Adibi A, Psaltis D, Diffraction efficiency of localized holograms in doubly doped LiNbO3 crystals, Opt. Lett. 25: (17),1243-1245, 2000. Dominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Background 1990 Ingénieur en science des matériaux 1993 PhD in materials science Activities 1993-1994 Research at the Center for Composite Materials, University of Delaware, USA (ccm.udel.edu), SNSF grant Since 1994 Research and teaching at EPFL, Composites, (LTC, LPAC) 1995-1999 Coordination Swiss Priority Program on Materials research: 2.2: Composites Since 1998 Biocomposites 2004-2009 Direction of the EPFL Transdisciplinary programme in Sport and Rehabilitation 2005-2008 Member of the EPFL Vice-Presidency for Innovation and Valorisation and direction a.i.EPFL-LTC Since 2016 Direction Discovery Learning Labs Materials/Bioengineering and Engineering
Of italian nationality, Alfio Quarteroni was born on May 30th 1952. He pursued his studies in mathematics at University of Pavia and at University of Paris VI. In 1986 he was nominated full professor at Catholic University of Brescia, later professor in mathematics at University of Minnesota at Minneapolis and professor in numerical analysis at Politecnico di Milano. He is designated full professor in 1997 and enters into service with EPFL in 1998. At EPFL, he teaches numerical analysis to engineers and mathematicians and holds specialized courses about mathematical modelling and scientific computing for master and PhD students. He had been scientific director of CRS4, plenary speaker of more than two hundred international conferences; he is member of the European Academy of Sciences, the Italian Academy of Sciences, the Lombard Academy of Science and Letters. He is Editor in Chief of two book series (MS&A and Unitext) by Springer, associate editor of 25 international journals. He has been plenary speaker at the International Congress of Mathematicians ICM2006. He had been responsible of several European research networks. His team has carried out the aerodynamic and hydrodynamic simulations for the optimization of Alinghi, the Swiss sailing yacht that has won two editions of the America's Cup in 2003 and 2007.
Prof. Dario Floreano is director of the Laboratory of Intelligent Systems at the Swiss Federal Institute of Technology Lausanne (EPFL). Since 2010, he is the founding director of the Swiss National Center of Competence in Robotics, a research program that brings together more than 20 labs across Switzerland. Prof. Floreano holds an M.A. in Vision, an M.S. in Neural Computation, and a PhD in Robotics. He has held research positions at Sony Computer Science Laboratory, at Caltech/JPL, and at Harvard University. His main research interests are Robotics and A.I. at the convergence of biology and engineering. Prof. Floreano made pioneering contributions to the fields of evolutionary robotics, aerial robotics, and soft robotics. He served in numerous advisory boards and committees, including the Future and Emerging Technologies division of the European Commission, the World Economic Forum Agenda Council, the International Society of Artificial Life, the International Neural Network Society, and in the editorial committee of several scientific journals. In addition, he helped spinning off two drone companies (senseFly.com and Flyability.com) and a non-for-profit portal on robotics and A.I. (RoboHub.org). Books
Manuale sulle Reti Neurali, il Mulino (in Italian), 1996 (first edition), 2006 (second edition)Evolutionary Robotics, MIT Press, 2000
Bio-Inspired Artificial Intelligence, MIT Press, 2008
Flying Insects and Robots, Springer Verlag, 2010
De nationalité allemande, né en 1952 à Lauchheim (Baden-Württemberg). Après des études de physique à l'Université Fridericiana de Karlsruhe, il y obtient son diplôme de physique en 1978.
En 1979, il rejoint l'Institut de Recherches franco-allemand à Saint-Louis (France) comme collaborateur scientifique. En 1986, il rejoint la division de recherche de Carl Zeiss à Oberkochen (Allemagne) où il développe principalement divers systèmes laser pour des applications médicales. Dès 1990, il dirige le laboratoire laser de la division médicale. En 1993, il prend la direction de l'unité "laser d'ophtalmologie". Dès le début 1995, il est chargé de restructurer et regrouper les nombreuses activités d'ophtalmologie chez Carl Zeiss et de les transférer à Jena. Durant cette période, il réalise des nouveaux instruments de réfraction, des biomicroscopes et des caméras rétiniennes.
Dès janvier 1998, il dirige la recherche de Carl Zeiss à Jena où il initie de nouveaux projets en microscopie, en microtechnique et en recherche médicale. En juillet 1998, il est nommé professeur ordinaire en optique biomédicale à l'Institut d'optique appliquée. Au sein du Département de microtechnique, son activité de recherche porte sur la photonique biomédicale. Il participe à l'enseignement d'optique et d'instrumentation biomédicale.
Short CV
1972 Physics University of Karlsruhe (Germany)
1979 l'Institut de Recherches franco-allemand à Saint-Louis (France)
1986 central research division Carl Zeiss, Oberkochen (Germany)
1990 Med - Division, ophthalmic lasers
1994 Ophthalmology division, Carl Zeiss Jena
1998 Head of Central research Carl Zeiss Jena
1998 full Professor Ecole Polytechnique Federale Lausanne, Switzerland
Reymond CLAVEL obtained his degree in mechanical engineering at the Federal Institute of Technology of Lausanne (EPFL), Switzerland, in 1973. After nine years of gathered experience in industrial plants at Hermes Precisa International (research and development), he was appointed professor at the EPFL, where he obtained his PhD degree in parallel robotics in 1991. He was then consecutively entrusted with the following positions: Head of the department, Director of the Section of micro engineering and, in 1993, Director of the Laboratory of robotics systems (LSRO). His present research topics are parallel robotics, high speed and high precision robotics, medical and surgical robotics applications, surgical instrumentation and precision mechanisms.
Reymond Clavels research successes in parallel and industrial robotics received worldwide special mentions.
Awards :
1989: Laureate of the JIRA AWARD (Japan Industrial Robot Association) for the DELTA parallel robot invented in 1985.
1996: Project winner of the Technologiestandort Schweiz competition and ABB Sonderpreis for the best robotics project.
1998: His laboratory is awarded the Grand Prix de lInnovation in Monaco for new robot technologies.
1999: Laureate of the Golden Robot Award for the DELTA Robot.
2003: Each of his three different submitted projects received the Swiss Technology Award.
2005: Project winner of the Swiss Technology Award competition with further the Sonderpreis 2005 from the Vontobel Foundation in the field of Inventing the future.
2006: Project winner of the Swiss Technology Award competition with Quantum leap into world of nano-EDM (a new high precision EDM machine based on the Delta kinematics).
2007: Two projects based on the LSROs researches are winner of the Swiss Technology Award competition: Cyberthosis for paraplegia rehabilitation (a collaboration with the company Swortec and the Fondation Suisse pour les Cyberthèses (FSC)) and the Microfactory realized in partnership with the CSEM .
