Fluorescent lamp

A fluorescent lamp, or fluorescent tube, is a low-pressure mercury-vapor gas-discharge lamp that uses fluorescence to produce visible light. An electric current in the gas excites mercury vapor, which produces short-wave ultraviolet light that then causes a phosphor coating on the inside of the lamp to glow. A fluorescent lamp converts electrical energy into useful light much more efficiently than an incandescent lamp. The typical luminous efficacy of fluorescent lighting systems is 50–100 lumens per watt, several times the efficacy of incandescent bulbs with comparable light output. For comparison, the luminous efficacy of an incandescent bulb may only be 16 lumens per watt. Fluorescent lamp fixtures are more costly than incandescent lamps because, among other things, they require a ballast to regulate current through the lamp, but the initial cost is offset by a much lower running cost. Compact fluorescent lamps are now available in the same popular sizes as incandescents and

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (69)

Related publications

Related people (11)

Related people

Related units (10)

Related units

Related concepts (103)

Related concepts

Related courses (31)

Related courses

Related lectures (42)

Related lectures

AR-241: Building technology III

Ce cours traite des divers domaines techniques intervenant dans la conception et la réalisation d'un bâtiment, soit : physique du bâtiment, structures, matériaux, construction et installations techniques; ceci dans une approche globale et transversale.

MICRO-428: Metrology

The course deals with the concept of measuring in different domains, particularly in the electrical, optical, and microscale domains. The course will end with a perspective on quantum measurements, which could trigger the ultimate revolution in metrology.

CH-424: Supramolecular chemistry

The course provides an introduction to supramolecular chemistry. In addition, current trends are discussed using recent publications in this area.

Incandescent light bulb

An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light with a wire filament that is heated until it glows. The filament is enclosed in a glass bulb that is

Light-emitting diode

A light-emitting diode (LED) is a semiconductor device that emits light when current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form o

Gas-discharge lamp

Gas-discharge lamps are a family of artificial light sources that generate light by sending an electric discharge through an ionized gas, a plasma. Typically, such lamps use a noble gas (argon, neon

Routes for Efficiency Enhancement in Fluorescent TADF Exciplex Host OLEDs Gained from an Electro-Optical Device Model

Markus Regnat, Beat Ruhstaller

Fluorescence-based organic light-emitting diodes (OLEDs) using thermally activated delayed fluorescence (TADF) have increasingly attracted attention in research and industry. One method to implement TADF is based on an emitter layer composed of an exciplex host and a fluorescent dopant. Even though the experimental realization of this concept has demonstrated promising external quantum efficiencies, the full potential of this approach has not yet been assessed. To this end, a comprehensive electro-optical device model accounting for the full exciton dynamics including triplet harvesting and exciton quenching is presented. The model parameters are fitted to multiple output characteristics of an OLED comprising a TADF exciplex host with a fluorescent emitter, showing an external quantum efficiency of >10%. With the model at hand, an emission zone analysis and a parameter study are performed, and possible routes for further efficiency enhancement are presented.

WILEY2020

A Molecular Logic Gate Enables Single-Molecule Imaging and Tracking of Lipids in Intracellular Domains

Adam Miklos Eördögh, Pablo Rivera Fuentes

Photoactivatable dyes enable single-molecule imaging and tracking in biology. Despite progress in the development of new fluorophores and labeling strategies, many intracellular compartments remain difficult to image beyond the limit of diffraction in living cells. For example, lipid domains, e.g., membranes and droplets, remain difficult to image with nanometric resolution. To visualize these challenging subcellular targets, it is necessary to develop new fluorescent molecular devices beyond simple on/off switches. Here, we report a fluorogenic molecular logic gate that can be used to image single molecules associated with lipid domains, most notably droplets, with excellent specificity. This probe requires the subsequent action of light, a lipophilic environment, and a competent nucleophile to produce a fluorescent product. The combination of these inputs results in a probe that can be used to image the boundary of lipid droplets in three dimensions with resolution beyond the limit of diffraction. Moreover, this probe enables single-molecule tracking of lipid trafficking between droplets and the endoplasmic reticulum.

AMER CHEMICAL SOC2020

A molecular logic gate enables super-resolved imaging of intracellular lipid droplets

Adam Miklos Eördögh, Pablo Rivera Fuentes

Photoactivatable dyes enable single-mol. imaging in biol. Despite progress in the development of new fluorophores and labeling strategies, many cellular compartments remain difficult to image beyond the limit of diffraction in living cells. For example, lipid droplets, which are organelles that contain mostly neutral lipids, have eluded single-mol. imaging. To visualize these challenging subcellular targets, it is necessary to develop new fluorescent mol. devices beyond simple on/off switches. Here, we report a fluorogenic mol. logic gate that can be used to image single mols. assocd. with lipid droplets with excellent specificity. This probe requires the subsequent action of light, a lipophilic environment and a competent nucleophile to produce a fluorescent product. The combination of these requirements results in a probe that can be used to image the boundary of lipid droplets in three dimensions with resolns. beyond the limit of diffraction. Moreover, this probe enables single-mol. tracking of lipids within and between droplets in living cells.

2019