Publications related to Shielded cable

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

Marcos Rubinstein, Farhad Rachidi-Haeri

In online single-sided partial discharge (PD) location, the measured PD reflection patterns are affected by the characteristics of all the components of the associated power network. This paper analyses the performance of a PD location method based on elec ...

2024

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

Farhad Rachidi-Haeri, Rafael Silva Alipio

In this paper, a rigorous and independent validation of two different approaches for calculating the ground-return impedance and admittance of multiconductor underground cable systems using the transmission line theory is carried out. Furthermore, analyses ...

2023

Locating lightning strikes and flashovers along overhead power transmission lines using electromagnetic time reversal

Mario Paolone, Gianluca Antonini, Reza Razzaghi, Keyhan Sheshyekani, Marco Scatena

The paper presents a method to identify the location of direct lightning strikes to overhead transmission lines and potential subsequent flashover(s). The method is based on the electromagnetic time reversal theory and relies on the use of a single measure ...

2018

A dynamic-relaxation formulation for analysis of cable structures with sliding-induced friction

Ian Smith, Nizar Bel Hadj Ali, Ann Christine Sychterz

In many cable structures, special types of joints are designed to allow cables to slide freely along the joints. Thus, a number of discrete cable elements are substituted by a single continuous cable that slides over multiple nodes. Continuous cables are e ...

Elsevier2017

A wire shaped coaxial photovoltaic solar cell

Michael Graetzel, Mohammad Khaja Nazeeruddin, Carlos Perez, Mohammad Ibrahim Dar

A wire shaped coaxial photovoltaic solar cell comprising: a conductive core wire shaped support (401), a nanostructured semiconductor scaffold layer (402), one or more successive perovskite layers (403), an optionally provided hole transporting material la ...

2017

Experimental Characterization of the Response of an Electrical and Communication Raceway to IEMI

Marcos Rubinstein, Nicolas Mora Parra

This paper reports the results of two experimental campaigns aimed at studying the high-frequency response of a raceway containing low voltage power, telephone, and Ethernet cables, to external electromagnetic field illumination. The raceway was tested aga ...

Institute of Electrical and Electronics Engineers2016

Low EMI signaling for parallel conductor interfaces

Mohammad Amin Shokrollahi, Nicolae Chiurtu

Methods are disclosed for creation of vector signaling codes having reduced or minimized electromagnetic emissions when transmitted over multiple conductor communications media such as microstrip channels. Particular code formulation constraints are shown ...

2016

Active control for mid-span connection of a deployable tensegrity footbridge

Ian Smith, Nicolas Willy Veuve, Seif Dalil Safaei

Tensegrity structures are spatial self-stressed pin jointed structures where compression components (struts) are surrounded by tension elements. This paper describes a near full-scale deployable tensegrity footbridge that deploys from both sides and connec ...

2016

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Shielded cable

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

A Method for the Improvement of the Stability in FDTD-Based Numerical Codes Evaluating Lightning-Induced Voltage

Design Study of a 50-kA React-and-Wind Bi-2212 Cable for Fusion Magnet

Locating lightning strikes and flashovers along overhead power transmission lines using electromagnetic time reversal

A dynamic-relaxation formulation for analysis of cable structures with sliding-induced friction

A wire shaped coaxial photovoltaic solar cell

Experimental Characterization of the Response of an Electrical and Communication Raceway to IEMI

Low EMI signaling for parallel conductor interfaces

Active control for mid-span connection of a deployable tensegrity footbridge

Graph Chatbot

Chat with Graph Search

A Method for the Improvement of the Stability in FDTD-Based Numerical Codes Evaluating Lightning-Induced Voltage

Locating lightning strikes and flashovers along overhead power transmission lines using electromagnetic time reversal

Low EMI signaling for parallel conductor interfaces

Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components

A dynamic-relaxation formulation for analysis of cable structures with sliding-induced friction

Assessment of the transmission line theory in the modeling of multiconductor underground cable systems for transient analysis using a full-wave FDTD method

Experimental Characterization of the Response of an Electrical and Communication Raceway to IEMI

Design Study of a 50-kA React-and-Wind Bi-2212 Cable for Fusion Magnet

Active control for mid-span connection of a deployable tensegrity footbridge

A wire shaped coaxial photovoltaic solar cell