Diode bridge | EPFL Graph Search

A diode bridge is a bridge rectifier circuit of four diodes that is used in the process of converting alternating current (AC) from the input terminals to direct current (DC, i.e. fixed polarity) on the output terminals. Its function is to convert the negative voltage portions of the AC waveform to positive voltage, after which a low-pass filter can be used to smooth the result into DC. When used in its most common application, for conversion of an alternating-current (AC) input into a direct-current (DC) output, it is known as a bridge rectifier. A bridge rectifier provides full-wave rectification from a two-wire AC input, resulting in lower cost and weight as compared to a rectifier with a three-wire input from a transformer with a center-tapped secondary winding. Prior to the availability of integrated circuits, a bridge rectifier was constructed from separate diodes. Since about 1950, a single four-terminal component containing the four diodes connected in a bridge configuratio

High voltage power supply system for tethered drone part II

Clément Bongini

A high voltage power supply system for a tethered drone is presented. The project is a follow-up to a previous semester project and the purpose of this project is to review the implementation, improve the design and solve problems. The system consists of an inverter part, a transformer part and a rectifier part. The input voltage is 600 VDC and the output voltage is 12VDC for a maximum power of 1500W. The inverter part is composed of 4 transistors controlled by two gate drivers. On the other side of the transformer, we have a bridge rectifier which will be implemented in 3 different ways: a full-bridge diode and two new active rectification systems, including mosfets and controllers. We will first present the different systems chosen, review the previous part and make improvements, then we will implement these new systems, design the prototypes and make tests for each system. Finally, we will test the whole converter.

2021

Convertisseurs multiniveaux asymétriques alimentés par transformateurs multi-secondaires basse-fréquence

Joseph Song Manguelle

In the last years, static power converters have become widely used in various applications. They can be found in domestic applications, railways, urban and ship transport, and even in several industrial systems. Some of these applications require a high or medium voltage power supply that is easily adjustable while providing good spectral performances. To overcome the maximum blocking voltage limits of the main power switches, multilevel techniques and other new power conversion topologies have been developed. They are series/parallel associations of existing power semiconductors, and allow generating an output voltage with many levels. The number of power semiconductors needed in these topologies increases as the number of levels increases. The power converter circuit becomes more complex and its reliability decreases. This thesis focuses on three-phase multilevel converters based on a series connection of single phase inverters (partial cells) in each phase. It's shown that, feeding partial cells with unequal DC-voltages (asymmetric feeding), increases the number of levels of the generated output voltage without any supplemental complexity to the existing topology. Voltage resolution is increased through interpolating the generated output voltage phasor (three phase voltage in α-β frame). This is achieved by seeking the non redundant switching states of the power switches. The resultant converter can generate a very high resolution voltage phasor up to the possible maximum resolution. This approach is generalized for any number of partial cells. Each partial cell is fed through a three-phase diode rectifier, fed itself through the windings of a multi-secondary low frequency power transformer. From analytical expressions in continuous and discontinuous current conix duction modes, it is shown that, from a supply network point of view, a symmetrical multilevel converter has a smaller total harmonic distortion than an asymmetrical multilevel converter with the same number of partial cells per phase. An asymmetrical multilevel converter is not more interesting than a classical three-phase converter, but its total harmonic distortion is compatible to the recommended IEEE std 519-1992. It is also shown that the advantages of an asymmetric multilevel converter from a load point of view (generation of a high resolution voltage phasor, possibility to choose the number of redundant switching states, reduction of the number of power semiconductors for the same voltage resolution, flexibility for the DC-voltage feeding choice) and the advantages of a symmetrical multilevel converter from a supply network point of view (smaller total harmonic distorsion) can be combined. Simulation results and the experimental test setup showed the reliability of the suggested approach.

EPFL2004

An Efficient Piezoelectric Energy Harvesting Interface Circuit Using a Sense-and-Set Rectifier

Yimai Peng

Piezoelectric energy harvesters (PEHs) are widely deployed in many self-sustaining systems, and proper rectifier circuits can significantly improve the energy conversion efficiency and, thus, increase the harvested energy. Various active rectifiers have been proposed in the past decade, such as synchronized switch harvesting on inductor (SSHI) and synchronous electric charge extraction (SECE). This article presents a sense-andset (SaS) rectifier that achieves maximum-power-point-tracking (MPPT) of PEHs and maintains optimal energy extraction for different input excitation levels and output voltages. The proposed circuit is fabricated in the 0.18-μm CMOS process with a 0.47-mm 2 core area, a 230-nW active power, and a 7-nW leakage power. Measured with a commercial PEH device (Mide PPA-1022) at 85and 60-Hz vibration frequency, the proposed circuit shows 512% and 541% power extraction improvement [figure of merit (FoM)] compared with an ideal full-bridge rectifier (FBR) for ON-resonance and OFF-resonance vibrations, respectively, while maintaining high efficiency across different input levels and PEH parameters.

IEEE2019

Convertisseurs multiniveaux asymétriques alimentés par transformateurs multi-secondaires basse-fréquence

Joseph Song Manguelle

EPFL2004