Steam locomotive

Summary

A steam locomotive is a locomotive that provides the force to move itself and other vehicles by means of the expansion of steam. It is fuelled by burning combustible material (usually coal, oil or, rarely, wood) to heat water in the locomotive's boiler to the point where it becomes gaseous and its volume increases 1,700 times. Functionally, it is a steam engine on wheels. In most locomotives, the steam is admitted alternately to each end of its cylinders in which pistons are mechanically connected to the locomotive's main wheels. Fuel and water supplies are usually carried with the locomotive, either on the locomotive itself or in a tender coupled to it. Variations in this general design include electrically-powered boilers, turbines in place of pistons, and using steam generated externally. Steam locomotives were first developed in the United Kingdom during the early 19th century and used for railway transport until the middle of the 20th century. Richard Trevithick built the f

Official source

https://en.wikipedia.org/wiki/Steam_locomotive

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (7)

Related publications

Related people

Related units

Related concepts (44)

Related concepts

Related courses (7)

Related courses

Related lectures (8)

Related lectures

, ,

The Locomotive Assignment Problem (LAP) is a class of planning and scheduling problems solved by assigning a fleet of locomotives to a network of trains. In the planning versions of the LAP, the type of consist (a group of linked locomotives) assigned to each train in a given schedule is determined. We introduce an optimization model (called consists selection) that precedes the planning LAP solution and determines the set of consist types. This selection leads to solutions that are characterized by potential savings in terms of overall fueling cost and are easier to handle in the routing phase. © 2015 Elsevier Ltd.

Elsevier2015

A Mathematical Model for the Locomotive Refueling Problem

Prem Kumar

This problem corresponds to refueling locomotives at different station yards during the course of its journey. Locomotive tanks have a fixed fuel capacity and prices of fuel vary across yards. In addition, there is a fixed cost for hiring a refueling truck at a yard and every refueling stop that the locomotive makes. Locomotives can power different train sets during a cyclical planning horizon running 14 days. The objective of this exercise is to minimize the total fuel costs fixed and operational for a given set of locomotives, trains and yards. In addition, there are numerous constraints relating to refueling, locomotive tank capacity, refueling truck capacity etc. This problem has similarity to the network flow problem. We formulate this problem as a Mixed Integer Program (MIP) and present our experience in the following sections.

2010

Degradation study of a reversible solid oxide cell (rSOC) short stack using distribution of relaxation times (DRT) analysis

Philippe Aubin, Stefan Diethelm, Suhas Nuggehalli Sampathkumar, Maria del Mar Perez Fortes, Jan Van Herle

Reversible solid oxide cells (rSOC) can convert excess electricity to valuable fuels in electrolysis cell mode (SOEC) and reverse the reaction in fuel cell mode (SOFC). In this work, a five - cell rSOC short stack, integrating fuel electrode (Ni-YSZ) supported solid oxide cells (Ni-YSZ parallel to YSZ vertical bar CGO parallel to LSC-CGO) with an active area of 100 cm(2), is tested for cyclic durability. The fuel electrode gases of H-2/N-2:50/50 and H-2/H2O:20/80 in SOFC and SOEC mode, respectively, are used during the 35 reversible operations. The voltage degradation of the rSOC is 1.64% kh(-1) and 0.65% kh(-1) in SOFC and SOEC mode, respectively, with fuel and steam utilisation of 52%. The post-cycle steady-state SOEC degradation of 0.74% kh(-1) suggests improved lifetime during rSOC conditions. The distribution of relaxation times (DRT) analysis suggests charge transfer through the fuel electrode is responsible for the observed degradation. (C) 2022 The Author(s). Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC.

PERGAMON-ELSEVIER SCIENCE LTD2022