Publications related to Temporomandibular joint

Enclosed Electronic System for Force Measurements in Knee Implants

Kamiar Aminian, Philippe Renaud, Peter Ryser, Arnaud Bertsch, Eric Meurville, Arash Arami, David Forchelet, Matteo Simoncini

Total knee arthroplasty is a widely performed surgical technique. Soft tissue force balancing during the operation relies strongly on the experience of the surgeon in equilibrating tension in the collateral ligaments. Little information on the forces in th ...

Mdpi Ag2014

Snap-fit Joints - CNC fabricated, Integrated Mechanical Attachment for Structural Wood Panels

Christopher Werner Matthias Robeller

This presentation presents our reserach into the design and potential applications of CNC fabricated snap-fit joints for cross-laminated veneer lumber panels (LVL). These joints are new to the building construction sector, but commonly used in other domain ...

2014

Snap-fit Joints - CNC fabricated, Integrated Mechanical Attachment for Structural Wood Panels

Yves Weinand, Christopher Werner Matthias Robeller, Paul Mayencourt

This presentation presents our reserach into the design and potential applications of CNC fabricated snap-fit joints for cross-laminated veneer lumber panels (LVL). These joints are new to the building construction sector, but commonly used in other domain ...

Riverside Architectural Press2014

Influence of the geometry of partially-spanning joints on mechanical properties of rock in uniaxial compression

Jian Zhao

As jointed rocks consist of joints embedded within intact rock blocks, their behavior depends on the behaviors of the joints and the intact rock blocks. In a jointed rock, there are two levels of heterogeneity within the jointed rocks due to the difference ...

Elsevier2013

A thin-layer interface model for wave propagation through filled rock joints

Jian Zhao, Wei Wu, Jianbo Zhu

The present study essentially employs a thin-layer interface model for filled rock joints to analyze wave propagation across the jointed rock masses. The thin-layer interface model treats the rough-surfaced joint and the filling material as a continuum med ...

Elsevier2013

Variable amplitude fatigue of adhesively-bonded pultruded GFRP joints

Thomas Keller, Anastasios Vassilopoulos, Roohollah Sarfaraz Khabbaz

The fatigue behavior of adhesively-bonded pultruded GFRP joints subjected to variable amplitude loading patterns was experimentally investigated. The failure mode of the examined joints was found to be similar to that under constant amplitude loading. The ...

Elsevier Sci Ltd2013

Hybrid Operational Space Control for Compliant Legged Systems

Roland Siegwart, Marco Hutter

This paper introduces the concept of hybrid operational space control, a method that unifies kinematic tracking of individual joints with an inverse dynamics task space controller for the remainder of the robot. The proposed control strategy allows for a h ...

2012

Measurement of Multi-segment Foot Joint Angles During Gait Using a Wearable System

Kamiar Aminian, Julien Favre, Xavier Crevoisier, Hossein Rouhani

Usually the measurement of multi-segment foot and ankle complex kinematics is done with stationary motion capture devices which are limited to use in a gait laboratory. This study aimed to propose and validate a wearable system to measure the foot and ankl ...

2012

A Comparison Between Joint Coordinate System and Attitude Vector for Multi-segment foot Kinematics

Kamiar Aminian, Julien Favre, Xavier Crevoisier, Hossein Rouhani

The joint angles of multi-segment foot models have been primarily described using two mathematical methods: the joint coordinate system and the attitude vector. This study aimed to determine whether the angles obtained through these two descriptors are com ...

Elsevier2012

An interconnection method for ultra-compliant electrodes

Stéphanie Lacour, Katherine Marie Musick

We are developing a novel interconnection method to form reliable joints between truly stretchable electrode mounts and rigid substrates. This is needed as the electrodes must be connected to implanted electronics if they are to be used for long term impla ...

2012

Temporomandibular joint

Enclosed Electronic System for Force Measurements in Knee Implants

Snap-fit Joints - CNC fabricated, Integrated Mechanical Attachment for Structural Wood Panels

Snap-fit Joints - CNC fabricated, Integrated Mechanical Attachment for Structural Wood Panels

Influence of the geometry of partially-spanning joints on mechanical properties of rock in uniaxial compression

A thin-layer interface model for wave propagation through filled rock joints

Variable amplitude fatigue of adhesively-bonded pultruded GFRP joints

Hybrid Operational Space Control for Compliant Legged Systems

Measurement of Multi-segment Foot Joint Angles During Gait Using a Wearable System

A Comparison Between Joint Coordinate System and Attitude Vector for Multi-segment foot Kinematics

An interconnection method for ultra-compliant electrodes

Graph Chatbot

Chat with Graph Search

Enclosed Electronic System for Force Measurements in Knee Implants

Snap-fit Joints - CNC fabricated, Integrated Mechanical Attachment for Structural Wood Panels

A thin-layer interface model for wave propagation through filled rock joints

Hybrid Operational Space Control for Compliant Legged Systems

Influence of the geometry of partially-spanning joints on mechanical properties of rock in uniaxial compression

Variable amplitude fatigue of adhesively-bonded pultruded GFRP joints

Snap-fit Joints - CNC fabricated, Integrated Mechanical Attachment for Structural Wood Panels

A Comparison Between Joint Coordinate System and Attitude Vector for Multi-segment foot Kinematics

Measurement of Multi-segment Foot Joint Angles During Gait Using a Wearable System

An interconnection method for ultra-compliant electrodes