Concept

Casting defect

Related publications (79)

Photocured Nanocellulose Composites: Recent Advances

Yves Leterrier, Aigoul Schreier, Mohammed Arif Poothanari, Julien Bras

This perspective gives an overview of recent progress in thefield of photocured polymer composites based on variousforms of nanocelluloses, with a focus on cellulose nanofibrils. The manufacturing processes and performances of these nanocellulosecomposites ...

AMER CHEMICAL SOC2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Processability, microstructure and precipitation of a Zr-modified 2618 aluminium alloy fabricated by laser powder bed fusion

Christian Leinenbach, Xavier Maeder

Additive manufacturing offers the opportunity to produce complex geometries from novel alloys with improved properties. Adapting conventional alloys to the process-specific properties can facilitate rapid implementation of these materials in industrial pra ...

2022

PDC microfabrication through KOH-etched Si mould casting

The purpose of this project is to fabricate a mould etched by KOH for PDC casting and produce the fist PDC using this method. Casting for PDC is a known process, it has been done with PDMS moulds created from Si masters. Si moulds have also been fabricated ...

2021

Ultimate Feature Sizes in Thermally Drawn Fibers: from Fundamental Analysis to Novel Functional Fibers

Inès Richard

The fiber thermal drawing process has emerged as a simple and scalable technique for the fabrication of multifunctional and flexible electronics. The integration of materials with various physical and functional properties in well-defined architectures ope ...

EPFL2021

Casting position effects on bond performance of reinforcement bars

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Rafael Alberto Moccia

The phenomena associated with the consolidation of fresh concrete (bleeding and plastic settlement) are commonly considered significant for the bond performance of reinforcement. However, rules to take care of such influence for design are not consistent a ...

ERNST & SOHN2021

A Contribution to the Design of Textile Reinforced Concrete Structures

Patrick Lorenzo Valeri

The reduction of green-house gas emissions is one of the global challenges that our society is facing and the production of cement plays a major role because concrete is the most used material worldwide. For every 1000 kg of cement produced, 900 kg of CO2, ...

EPFL2020

The influence of casting position and disturbance induced by reinforcement on the structural concrete strength

Aurelio Muttoni, Miguel Fernández Ruiz, Francesco Rafael Alberto Moccia

It is well known that control specimens used to assess the concrete strength of new structures have different casting and curing conditions than those of actual structures. Notably, after pouring of the concrete and before its hardening, a number of phenom ...

ERNST & SOHN2020

Combining alloy and process modification for micro-crack mitigation in an additively manufactured Ni-base superalloy

Roland Logé, Christian Leinenbach, Jamasp Jhabvala, Xavier Maeder, Hossein Ghasemi Tabasi, Toni Ivas, Rafal Wróbel

The additive manufacturing (AM) of the gamma' precipitation strengthened Ni-base superalloys still remains a challenge due to their susceptibility to micro-cracking. Post-processing, such as HIPing, has been shown to heal the micro-cracks but it remains de ...

ELSEVIER2020

Basic creep and autogenous shrinkage of Limestone Calcined Clay Cement (LC3)

Julien Ston

The use of supplementary cementitious materials (SCM) to lower the clinker factor of cements is now commonplace, for it benefits performance, economics and ecology. This thesis focuses on ternary blends of limestone and calcined kaolinitic clays, two very ...

EPFL2019

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.