Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Polycrystalline zirconia (3Y-TZP grade) specimens unreinforced and reinforced with multiwalled carbon nanotubes (MWCNTs) or silicon carbide whiskers (SiCws) were processed by powder metallurgy and studied by mechanical spectroscopy. The high-temperature me ...
Nickel oxide and yttria doped zirconia composite strength is crucial for anode-supported solid oxide fuel cells, especially during transient operation, but also for the initial stacking process, where cell curvature after sintering can cause problems. This ...
Cationic zirconocene complexes are active species in Ziegler-Natta catalysis for olefin polymerization. structure and metal-ligand bond strength strongly influence their activity. In the present work, the multiphoton dissociation (IRMPD) spectrum of mass s ...
Two zirconium alloys (Zr-2.5%Nb) - one oxidized in a pressurized water reactor, the other oxidized in autoclave and used as reference - are analyzed by combining synchrotron-based scanning transmission and fluorescence X-ray microscopy and micro-X-ray abso ...
X-ray absorption near-edge structure (XANES) spectroscopy is applied to Zr-based alloys ((Zr, x%Nb) with x ⩽ 1 wt.%) corroded in steam at 415 °C to resolve the niobium speciation in the metal and the oxide parts of their metal/oxide interface. By combining ...
The position of (Fe-Zr',(Ti)-V-O(center dot center dot))(center dot) defect complexes in Pb[Zr0.52Ti0.48]O-3 (PZT) piezoelectric ceramics was investigated by means of electron paramagnetic resonance (EPR) spectroscopy. The method of analysis pursued to obt ...
Fretting-corrosion is a material degradation process resulting from the combined action of a corrosive environment and small displacement fretting wear. In this work, the fretting-corrosion behavior of Ti-12.5Mo, Ti-13Nb-13Zr, and Ti-29Nb-13Ta-4.6Zr, beta ...
High zirconia refractories are composed of a zirconia skeleton surrounded by an intergranular glassy phase. In these materials, zirconia undergoes up to two successive phase transitions during the manufacturing process, c → t then t → m. This leads, after ...
Combinatorial high-vacuum chemical vapor deposition (HV-CVD) was used to identify the conditions required to obtain hafnium-doped lithium niobate thin films on sapphire {001} substrates. Niobium tetraethoxydimethylaminoethoxide (Nb(OEt)(4)(dmae)), lithium ...
Configuration of domain walls in undoped and Fe+3-doped lead zirconate titanate (PZT) ceramics at the morphotropic phase boundary has been investigated by the transmission electron microscopy. The distance between domain walls in undoped PZT is on the orde ...
