In optics, defocus is the aberration in which an image is simply out of focus. This aberration is familiar to anyone who has used a camera, videocamera, microscope, telescope, or binoculars. Optically, defocus refers to a translation of the focus along the optical axis away from the detection surface. In general, defocus reduces the sharpness and contrast of the . What should be sharp, high-contrast edges in a scene become gradual transitions. Fine detail in the scene is blurred or even becomes invisible. Nearly all image-forming optical devices incorporate some form of focus adjustment to minimize defocus and maximize image quality. The degree of image blurring for a given amount of focus shift depends inversely on the lens f-number. Low f-numbers, such as to 2.8, are very sensitive to defocus and have very shallow depths of focus. High f-numbers, in the 16 to 32 range, are highly tolerant of defocus, and consequently have large depths of focus. The limiting case in f-number is the pinhole camera, operating at perhaps 100 to 1000, in which case all objects are in focus almost regardless of their distance from the pinhole aperture. The penalty for achieving this extreme depth of focus is very dim illumination at the imaging film or , limited resolution due to diffraction, and very long exposure time, which introduces the potential for image degradation due to motion blur. The amount of allowable defocus is related to the resolution of the imaging medium. A lower-resolution imaging chip or film is more tolerant of defocus and other aberrations. To take full advantage of a higher resolution medium, defocus and other aberrations must be minimized. Defocus is modeled in Zernike polynomial format as , where is the defocus coefficient in wavelengths of light. This corresponds to the parabola-shaped optical path difference between two spherical wavefronts that are tangent at their vertices and have different radii of curvature. For some applications, such as phase contrast electron microscopy, defocused images can contain useful information.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related courses (7)
MICRO-517: Optical design with ZEMAX
Introduction to computer-aided design of optical systems using "ZEMAX OpticStudio" optical design software. Principles of optical systems design and performance analysis with geometrical optics and ra
MSE-352: Introduction to microscopy + Laboratory work
Ce cours d'introduction à la microscopie a pour but de donner un apperçu des différentes techniques d'analyse de la microstructure et de la composition des matériaux, en particulier celles liées aux m
Show more
Related lectures (43)
Transmission Electron Microscopy: Operation and Imaging
Explores the operation and imaging techniques of Transmission Electron Microscopy (TEM), including service mode setup and digital micrograph usage.
Crystal Structure Imaging
Explores high-resolution transmission electron microscopy for crystal structure imaging, covering aberrations, defocus values, CS correctors, and advanced techniques.
Transmission Electron Microscopy: Weak Phase Object ApproximationMOOC: Transmission Electron Microscopy for Materials Sciences
Explains the principles of Transmission Electron Microscopy focusing on the Weak Phase Object Approximation.
Show more
Related publications (59)

A Cavity-Microscope for Quantum Simulations with Locally-Controllable All-to-All Interactions

Nick Jacob Sauerwein

This thesis presents the development, construction, and benchmark of an experimental platform that combines cold fermionic 6Li atoms with locally controllable light-matter interactions. To enable local control, a new device, the cavity-microscope, was crea ...
EPFL2024

Ghost imaging using two SPAD array detectors: a parameter study towards the realization of a 3D quantum microscope

Edoardo Charbon, Claudio Bruschini, Paul Mos, Yang Lin

Quantum ghost imaging can be an important tool in making optical measurements. One of the most useful aspects of ghost imaging is the unique ability to correlate two sets of independently collected information. We aim to use the principles of ghost imaging ...
Spie-Int Soc Optical Engineering2024

Adaptive optics enables multimode 3D super-resolution microscopy via remote focusing

Aleksandra Radenovic, Vytautas Navikas, Sanjin Marion, Adrien Charles-François Raymond Descloux, Kristin Stefanie Grussmayer

A variety of modern super-resolution micro-scopy methods provide researchers with previouslyinconceivable biological sample imaging opportunities ata molecular resolution. All of these techniques excel atimaging samples that are close to the coverslip ...
2021
Show more
Related concepts (11)
Circle of confusion
In optics, a circle of confusion (CoC) is an optical spot caused by a cone of light rays from a lens not coming to a perfect focus when imaging a point source. It is also known as disk of confusion, circle of indistinctness, blur circle, or blur spot. In photography, the circle of confusion is used to determine the depth of field, the part of an image that is acceptably sharp. A standard value of CoC is often associated with each image format, but the most appropriate value depends on visual acuity, viewing conditions, and the amount of enlargement.
Magnifying glass
A magnifying glass is a convex lens that is used to produce a magnified of an object. The lens is usually mounted in a frame with a handle. A magnifying glass can be used to focus light, such as to concentrate the sun's radiation to create a hot spot at the focus for fire starting. A sheet magnifier consists of many very narrow concentric ring-shaped lenses, such that the combination acts as a single lens but is much thinner. This arrangement is known as a Fresnel lens.
Optical resolution
Optical resolution describes the ability of an imaging system to resolve detail, in the object that is being imaged. An imaging system may have many individual components, including one or more lenses, and/or recording and display components. Each of these contributes (given suitable design, and adequate alignment) to the optical resolution of the system; the environment in which the imaging is done often is a further important factor. Resolution depends on the distance between two distinguishable radiating points.
Show more
Related MOOCs (2)
Transmission Electron Microscopy for Materials Sciences
Learn about the fundamentals of transmission electron microscopy in materials sciences: you will be able to understand papers where TEM has been used and have the necessary theoretical basis for takin
Transmission Electron Microscopy for Materials Sciences
Learn about the fundamentals of transmission electron microscopy in materials sciences: you will be able to understand papers where TEM has been used and have the necessary theoretical basis for takin

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.