Telemetry | EPFL Graph Search

Telemetry is the in situ collection of measurements or other data at remote points and their automatic transmission to receiving equipment (telecommunication) for monitoring. The word is derived from the Greek roots tele, 'remote', and metron, 'measure'. Systems that need external instructions and data to operate require the counterpart of telemetry: telecommand. Although the term commonly refers to wireless data transfer mechanisms (e.g., using radio, ultrasonic, or infrared systems), it also encompasses data transferred over other media such as a telephone or computer network, optical link or other wired communications like power line carriers. Many modern telemetry systems take advantage of the low cost and ubiquity of GSM networks by using SMS to receive and transmit telemetry data. A telemeter is a physical device used in telemetry. It consists of a sensor, a transmission path, and a display, recording, or control device. Electronic devices are widely used in telemetry and ca

Optimization of the treatment of hydrocephalus by the non-invasive measurement of the intra-cranial pressure

Alec Ginggen

This thesis work aims to optimize the treatment of hydrocephalus. It consists of two distinct objectives: the optimization of the diagnosis of patients implanted with a shunt system for the derivation of cerebro-spinal fluid (CSF) and the optimization of the treatment by a better understanding of the fluidic characteristics of shunts. The diagnosis optimization was addressed by a pressure sensor allowing for the measurement of the intra-cranial pressure (ICP). It has been characterized experimentally in vitro and in vivo in animals. The pressure sensor is integrated along a shunt system for the derivation of CSF and it can be interrogated by telemetry. The non-invasive access to the ICP will allow the physician to verify that the implantation of a shunt system has successfully restored a physiological ICP level. It will also provide a method to verify that the shunt is not blocked and fully functional. Simple mathematical models of the hydrodynamics of shunt systems used clinically are presented to address the second objective. These simple models are verified experimentally by characterizing the shunts on a setup developed for that purpose. This setup allows the characterization of non-bijective flow-pressure characteristics. The integration of mathematical models of shunt systems in a broader model describing the circulation of CSF in a patient implanted with a shunt will permit to predict the dynamics of the CSF circulation. It will also be a useful tool for shunt manufacturers to identify shunt characteristics critical to successfully restore a physiological condition after implantation. The results of this thesis work are presented in the form of an introduction, three scientific publications and a short conclusion. The motivations for the thesis work are presented in the introduction chapter along with background information about hydrocephalus and its treatment. A mathematical model describing the circulation of CSF is described in the same chapter. This model illustrates the interactions between the fluidic constituents of the cranial vault that lead to a physiological CSF circulation and ICP level. This model has been adapted to account for the implantation of a shunt system. The key technical characteristics of the pressure sensor are exposed in the subsequent section along with the experimental techniques and a short summary of the publications and patents. The pressure sensor is described in the first publication with a focus on the pressure transducer, the original sensor encapsulation technique, the electronics embedded in the sensor and the telemetry technique. A capacitive pressure transducer, which provides an accurate measurement of the absolute pressure, has been developed. The transducer technology guarantees a minimal drift of its characteristics with time. The design and the key manufacturing steps of the transducer are exposed. A hermetically closed capsule protects the sensor electronics. The effect of the packaging components and the assembly techniques on the sensor characteristics are analyzed. An analysis of the water diffusion through the walls of the capsule is presented since resistance to water permeation is a critical characteristics of the packaging. Minimal drift with time can only be achieved if the atmosphere in the capsule is extremely stable. The packaging provides a barrier to water diffusion in order to keep a constant low humidity level in the sensor. The telemetric link between the sensor and the external reading unit is provided by an inductive coupling between two loop antennas. The coupling allows the simultaneous transmission of power to the sensor and of the pressure data to the external unit. The fundamental characteristics of the telemetric link are described. The interfacing electronic components are integrated in an ASIC that consumes a minimal amount of energy. Lastly, the experimental characterization of the accuracy of the sensor and its thermal stability are presented. The second publication is focused on the in vivo characterization of the pressure sensor in animals. An animal model of hydrocephalus has been developed in order to characterize the correlation between the pressure measured by the sensor integrated into a shunt system and a reference provided by a direct measurement of the ICP in the ventricles of the brain. Hydrocephalus was induced in dogs by injection of kaolin and glue in the cisterna magna. The time course of hydrocephalus induction was followed by the measurement of the size of the ventricles by an ultrasonic imaging technique. Approximately 50 days after the injection of kaolin and glue, a shunt system integrating a pressure sensor was implanted between the brain ventricles and the peritoneum. A reference pressure sensor was also implanted in the ventricles. The pressure was then measured for up to 48 hours. The correlation between the pressure in the shunt and the intra-ventricular pressure is documented in the publication. The advantages associated with the measurement of the pressure in the shunt versus an intra-ventricular measurement technique are discussed and the pressure sensor is compared with other published sensors. The third publication describes three commonly used shunt systems by simple hydrodynamic mathematical models. A setup allowing the characterization of shunt systems having a non-bijective pressure-flow characteristics is presented. The experimental characteristics of the three shunt systems is compared to the theoretical models. The "pressure-controlled" and "flow-controlled" terminologies, which are frequently used in the clinical field, are discussed in the context of the hydrodynamic characteristics of shunts. Four patent applications have been submitted in the course of this thesis work. The three first applications have been granted, and the last one is filed. The first patent protects the pressure sensor encapsulation technique. The second patent protects the concept of a shunt system allowing the non-invasive adjustment of the resistance of the shunt valve. This concept has been developed as a result of the analysis of the critical parameters to successfully restore a physiological ICP level by the mathematical model of the CSF circulation. The third patent protects the use of the pressure sensor packaging technique for a flow sensor integrated in the shunt system. The last application protects the mechanism that regulates the power of the radio-frequency wave emitted by the external reading unit on the basis of the voltage induced in the sensor. The last chapter, entitled "Conclusion and Perspectives" summarizes the outcome of this thesis work in reference to the optimization of the treatment of hydrocephalus. This work laid the foundation for the use of the sensor in humans through a clinical study. The ICP data gathered during such a study would then allow the validation of the mathematical model of CSF circulation presented in this thesis.

EPFL2007

An Instrumented High-Speed Rotor With Embedded Telemetry For The Continuous Spatial Pressure Profile Measurement In Gas Lubricated Bearings: A Proof Of Concept

Jürg Alexander Schiffmann, Karim Magdi Zakaria Abdelrahman Shalash

Gas lubricated bearings are capable of supporting high speed rotors with satisfactory load capacities. Pressure is one of the constitutional quantities governing the flow field in gas lubricated bearings. Knowledge of the pressure is of principal importance in the fundamental understanding of such bearings and for the calibration of reduced order models. These measurements can be done from the bearing side using pressure taps in the bushings, however, the measurement points will yield a spatially sampled profile consisting of discrete points relative to the bearing bushing. This measurement technique is simple, yet, several details cannot be captured. In order to acquire a continuous scan of the pressure field inside the bearing, it is necessary to measure from the rotor side. Such onboard measurement technique is challenging due to constraints in volume, G-force, and data and power transmission through the rotor. This paper presents an instrumented measurement rotor with embedded pressure probes and a wireless telemetry, which is capable of the continuous pressure field measurement inside a high-speed externally pressurized gas journal bearing. The bearing under investigation has a diameter of 40mm, L/D = 1, and was tested up to 37.5 krpm. The bearing is of the annular type, with 2x18 00.1mm restrictor orifices. Measurements at discrete points using pressure taps inside the test bearing were also performed for the sake of comparison. The measurements from both sides (bushing and rotor) were in good agreement at quasi-static conditions. At higher operational speeds, it was necessary to perform an in -situ system identification and calibration for the embedded pressure probes using the bearing side measurements as a reference. The in-situ system identification technique was successful to reconstruct the attenuated pressure signals for a wide range of supply pressures and rotor speeds. The instrumented rotor was proven qualified to perform time-resolved pressure measurements within the gas film ofjournal bearings up to 37.5 krpm.

Amer Soc Mechanical Engineers2019

Pressure Profile Measurements Within The Gas Film Of Journal Foil Bearings Using An Instrumented Rotor With Telemetry

Jürg Alexander Schiffmann, Karim Magdi Zakaria Abdelrahman Shalash

Foil bearings are strong candidates to support oil -free turbomachinery. Although foil bearings are a widely used technology, models describing their behavior are not validated using the film pressure, which is the fundamental variable of any fluid film bearing. This paper presents pressure profiles measured within the gas film of a journal foil bearing. The pressure is measured using an instrumented rotor with embedded pressure probes and wireless telemetry. The measurements yield the simultaneous circumferential pressure profiles at two axial positions inside the bearing. Proximity probes on the bearing allowed the measurement of the corresponding rotor orbits. The bearing under investigation is a bump type compliant journal bearing, with a nominal diameter of 40mm, an L/D = 1, and was tested up to 37.5 krpm. Load-displacement and break-away tests were performed on the test bearing in order to identify bearing parameters necessary for reproducibility. The pressure profiles are compared to a frequency domain foil bearing model. This paper is a step towards further fundamental understanding of the foil bearing behavior, and the validation of the rich modelling literature.

Amer Soc Mechanical Engineers2019

Optimization of the treatment of hydrocephalus by the non-invasive measurement of the intra-cranial pressure

Alec Ginggen

EPFL2007

An Instrumented High-Speed Rotor With Embedded Telemetry For The Continuous Spatial Pressure Profile Measurement In Gas Lubricated Bearings: A Proof Of Concept

Jürg Alexander Schiffmann, Karim Magdi Zakaria Abdelrahman Shalash

Amer Soc Mechanical Engineers2019