John Richard ThomeJohn R. Thome is Professor of Heat and Mass Transfer at the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland since 1998, where his primary interests of research are two-phase flow and heat transfer, covering both macro-scale and micro-scale heat transfer and enhanced heat transfer. He directs the Laboratory of Heat and Mass Transfer (LTCM) at the EPFL with a research staff of about 18-20 and is also Director of the Doctoral School in Energy. He received his Ph.D. at Oxford University, England in 1978. He is the author of four books: Enhanced Boiling Heat Transfer (1990), Convective Boiling and Condensation, 3rd Edition (1994), Wolverine Engineering Databook III (2004) and Nucleate Boiling on Micro-Structured Surfaces (2008). He received the ASME Heat Transfer Division's Best Paper Award in 1998 for a 3-part paper on two-phase flow and flow boiling heat transfer published in the Journal of Heat Transfer. He has received the J&E Hall Gold Medal from the U.K. Institute of Refrigeration in February, 2008 for his extensive research contributions on refrigeration heat transfer and more recently the 2010 ASME Heat Transfer Memorial Award. He has published widely on the fundamental aspects of microscale and macroscale two-phase flow and heat transfer and on enhanced boiling and condensation heat transfer.
Nikolaos StergiopoulosEducation
MTE, Managing the Technology Enterprise Program (2000), IMD, Lausanne
Ph.D. in Biomedical Engineering & Engineering Mechanics (1990) Iowa State University, Ames, Iowa.
MS in Biomedical Engineering (1987) Iowa State University, Ames, Iowa.
Diploma in Mechanical Engineering (1985) National Technical University of Athens.
Professional Activities
2002 - present: Professor and director of LHTC
2010 - present: Founder and director of Rheon Medical SA, Préverenges, Switzerland
2008 - present: Founder and director of Antlia S.A., PSE-C, EPFL campus, Switzerland
1998 - 2007: Founder and Scientific Director of EndoArt S.A., Lausanne, Switzerland
1996 - 2002: Assistant professor at the Biomedical Engineering Laboratory, Swiss Federal Institute of Technology, Lausanne, Switzerland.
1991 - 1996: Research Associate at Swiss Federal Institute of Technology - Lausanne
1990 - 1991: Lecturer, Iowa State University
Fernando Porté AgelFERNANDO PORTÉ AGEL Professor Director, Wind Engineering and Renewable Energy Laboratory (WIRE) School of Architecture, Civil and Environmental Engineering (ENAC) École Polytechnique Fédérale de Lausanne (EPFL) e-mail: fernando.porte-agel@epfl.ch RESEARCH INTERESTS Environmental fluid mechanics. Computational fluid dynamics. Atmospheric boundary layers. Turbulence. Large-eddy simulation. Wind energy. Wind engineering. Renewable energy. EDUCATION Ph.D. 1999 Johns Hopkins University, Environmental Engineering M.Sc. 1995 Hydrologic Engineering, IHE - Delft, The Netherlands B.S. 1992 Universidad Politécnica de Cataluña, Spain ACADEMIC POSITIONS 2010-present: Full Professor, School of Architecture, Civil and Environmental Engineering (ENAC), École Polytechnique Fédérale de Lausanne (EPFL), Switzerland 2005-2009: Associate Professor, St. Anthony Falls Laboratory and Department of Civil Engineering, University of Minnesota, Minneapolis, MN, USA 2000-2005: Assistant Professor, St. Anthony Falls Laboratory, Department of Civil Engineering, University of Minnesota, Minneapolis, MN, USA AWARDS AND FELLOWSHIPS McKnight Presidential Fellow (2006-2009), University of Minnesota, USA McKnight Land-Grant Professorship (2003-2005), University of Minnesota, USA NASA Young Investigator Award (2001-2004), USA NSF CAREER Award (2001-2006), (Division of Earth Sciences Hydrological Sciences), USA Outstanding Student Paper Award: Hydrology Section, Fall Meeting of the American Geophysical Union; San Francisco, 1998. Research Award (1995-1997): La Caixa fellowship program; Barcelona, Spain. Research Award (1993-1995): Dutch Ministry of Foreign Affairs fellowship. Research Award (1990-1993): Spanish Civil Engineering Association. Jacques RappazOriginaire de Neyruz-sur-Moudon (VD), Jacques Rappaz est né le 22 mars 1947. Après ses études primaires et secondaires à Lausanne, il étudie la physique, de 1964 à 1970, à l'Ecole Polytechnique de l'Université de Lausanne (EPUL et EPFL dès 1969) où il obtient son diplôme en janvier 1971. Il entreprend ensuite un travail de recherche en analyse numérique à l'EPFL. En avril 1976, il soutient une thèse consacrée à l'approximation spectrale d'opérateurs provenant de la physique des plasmas. De 1977 à 1980, il est boursier du Fonds National Suisse (FNS) et séjourne à Paris. A l'Ecole Polytechnique de Palaiseau et à l'Université Paris VI, il travaille sur l'approximation de problèmes non-linéaires provenant de la physique.De 1980 à 1985, il retourne à l'EPFL en tant que chercheur au FNS puis collaborateur scientifique du Professeur Jean Descloux. En 1983 il entreprend, en collaboration avec l'entreprise Alusuisse, des recherches sur la simulation numérique du procédé Hall-Héroult permettant la production de l'aluminium par électrolyse. Ces recherches ont débouché par la suite sur de nombreux projets en collaboration avec les compagnies Alcan, puis Péchiney et Rio Tinto. En 1985, Jacques Rappaz est nommé professeur ordinaire de mathématiques appliquées à l'Université de Neuchâtel qu'il quittera en octobre 1987 pour un poste de professeur ordinaire à l'EPFL. De 1983 à 2012 où il a pris sa retraite, Jacques Rappaz a enseigné de nombreux cours d'analyse et d'analyse numérique aux ingénieurs et aux mathématiciens de l'EPFL, de l’Université de Genève et de l'Université de Neuchâtel. Sa recherche concerne les aspects théoriques et pratiques de la résolution numérique des équations aux dérivées partielles. Il a participé à de nombreux projets de simulations numériques en collaboration avec les milieux industriels et/ou les départements d'ingénieurs de l'EPFL.
Tobias SchneiderTobias Schneider is an assistant professor in the School of Engineering at EPFL, the Swiss Federal Institute of Technology Lausanne. He received his doctoral degree in theoretical physics in 2007 from the University of Marburg in Germany working on the transition to turbulence in pipe flow. He then joined Harvard University as a postdoctoral fellow. In 2012 Tobias Schneider returned to Europe to establish an independent Max-Planck research group at the Max-Planck Institute for Dynamics and Self-Organization in Goettingen. Since 2014, he is working at EPFL, where he teaches fluid mechanics and heads the 'Emergent Complexity in Physical Systems' laboratory. Tobias Schneider's research is focused on nonlinear mechanics with specific emphasis on spatial turbulent-laminar patterns in fluid flows transitioning to turbulence. His lab combines dynamical systems and pattern-formation theory with large-scale computer simulations. Together with his team, Schneider develops computational tools and continuation methods for studying the bifurcation structure of nonlinear differential equations such as those describing the flow of a fluid. These tools are published as open-source software at channelflow.ch. Publications: Google Scholar
Mohamed FarhatM. Farhat was born in Casablanca in 1962 (Moroccan citizen). He graduated at Ecole Nationale Supérieure d'Hydraulique et de Mécanique de Grenoble (France. He joined The LMH laboratory in 1986 as research assistant. He completed in 1994 a Ph.D. thesis on Cavitation. He joined the R&D department of Hydro-Quebec in Montréal (Canada) in 1995 where he was in charge of several research projects in the areas of production and transportation of hydropower and mainly the monitoring of large hydro turbines. Since 2001, he is senior scientist at the LMH laboratory, head of the cavitation group. He is also lecturer in Master and Doctoral programs. He is member of the Doctoral Committee in Mechanics.
