Concept
Rivet
Related publications (33)
Experimental Investigation of Instability-Free Welded Moment Connections With Simplified Weld Details
Dimitrios Lignos, Andronikos Skiadopoulos
In capacity designed steel moment resisting frames, inelastic deformations are mostly concentrated in the steel beams and the column fixed ends of the first story. This design concept limits the participation of the column web’s panel zone in the energy di ...
2023Enhancement of riveted steel bridges by adding a trough in UHPFRC acting in composite action
Riveted railway bridges are commonly considered as being “old”, having fatigue damage and are therefore replaced. While this practice should be by now obsolete by using novel engineering methods like structural monitoring, prolongation of the service durat ...
Taylor & Francis2021Optimization of multi-directional fiber architecture for resistance and ductility of bolted FRP profile joints
Thomas Keller, Lulu Liu, Xin Wang
In view of the low structural efficiency of bolted joints in pultruded fiber-reinforced polymer (FRP) profiles with mainly unidirectional (UD) fiber architecture, off-axis plies were considered as an effective way to improve bolted joint performance. An ex ...
ELSEVIER SCI LTD2020A Calculation Method for Interconnected Timber Elements Using Wood-Wood Connections
Yves Weinand, Julien Gamerro, Jean-François Bocquet
Wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners in timber constructions. Currently, they can be manufactured and implemented more efficiently thanks to digital fabrication techniques. In addition, with th ...
2020Development of Novel Standardized Structural Timber Elements Using Wood-Wood Connections
Traditional wood-wood connections, widely used in the past, have been progressively replaced by steel fasteners and bonding processes in modern timber constructions. However, the emergence of digital fabrication and innovative engineered timber products ha ...
EPFL2020Modelling Workflow for Segmented Timber Shells using Wood-wood Connections.
Yves Weinand, Julien Gamerro, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau
This paper presents a modelling method based on planarization for double-curved segmented timber shell made from quad polygons and assembled by wood-wood connections. The inspiration is taken from timber dome structures, where solid timber walls were built ...
Springer2019Modelling Workflow for Segmented Timber Shells using Wood-wood Connections.
Yves Weinand, Julien Gamerro, Petras Vestartas, Nicolas Henry Pierre Louis Rogeau
This paper presents a modelling method based on planarization for double-curved segmented timber shell made from quad polygons and assembled by wood-wood connections. The inspiration is taken from timber dome structures, where solid timber walls were built ...
2019Enhancing Punching Strength and Deformation Capacity of Flat Slabs
Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone
Punching reinforcement systems have significantly developed in recent years as they allow enhancing the punching resistance of slab-column connections as well as their deformation capacity. These systems, with varying geometry and layout, normally consist ...
2019Shell Modelling Strategies for the Assessment of Punching Shear Resistance of Continuous Slabs
Aurelio Muttoni, Raffaele Cantone, Beatrice Belletti
The punching shear resistance formulation provided by Model Code 2010 is calibrated on the basis of experimental tests on isolated slabs supported on columns. According to Level of Approximation approach, several quantities are required for the design punc ...
SPRINGER INTERNATIONAL PUBLISHING AG2018On the benefits of a stress criterion for the simulation of cup drawing process
Experimental and numerical cup drawing process has been investigated on 0.65 mm zinc sheets. The cup exhibits anisotropic earrings due to the material microstructure. The material formability is studied through elliptical bulge tests in the rolling, diagon ...
Springer France2018