Publications related to Engineering tolerance

On the slip burst amplitude cutoff in dislocation-rich microcrystals

The plastic deformation of small-scale face-centered cubic metals exhibits intermittent slip burst events that appear on stress-strain curves as sudden strain jumps and/or load drops. These events are generally attributed to the avalanche-like cooperative ...

Oxford2023

Multi-Objective Optimization of Grooved Gas Journal Bearings for Robustness in Manufacturing Tolerances

Jürg Alexander Schiffmann, Eliott Philippe Guenat

A tolerancing method highlighting trade-offs against key design variables of mechanical systems is proposed and applied to herringbone-grooved gas journal bearings. Gas bearings typically suffer from a subsynchronous instability, demanding a very tight tol ...

2019

1200 V Multi-Channel Power Devices with 2.8 Ω•mm ON-Resistance

Elison de Nazareth Matioli, Jun Ma, Catherine Erine, Minghua Zhu, Kai Cheng

Here we report novel multi-channel AlGaN/GaN MOSHEMTs with high breakdown voltage (V BR ) and low ON-resistance (R ON ). The multi-channel structure was judiciously designed to yield a small sheet resistance (R s ) of 80 Ω/sq using only four 2DEG channels, ...

IEEE2019

STEP-NC compliant process planning of additive manufacturing: remanufacturing

Ian Anthony Stroud, Jumyung Um

Additive manufacturing is becoming one of the key methods for reproducing repair sections in remanufacturing processes. The major advantage of using additive processes is to minimize production time and waste. However, the surface quality and shape accurac ...

Springer London Ltd2017

A Robust Capacitive Digital Read-Out Circuit for a Scalable Tactile Skin

Sandro Carrara, Danilo Demarchi

This paper presents a robust, capacitive digital read-out circuit (ROC) for sensitive skin applications in humanoid robots. The ROC can be calibrated to null the parasitic effects of transducer variation due to physical assembly. A prototype is fabricated ...

Institute of Electrical and Electronics Engineers2017

The DEMO wall load challenge

Ambrogio Fasoli, Jonathan Graves, Jan Horacek, David Pfefferlé, Samuel Lanthaler, Bernhard Sieglin, Hartmut Zohm

For several reasons the challenge to keep the loads to the first wall within engineering limits is substantially higher in DEMO compared to ITER. Therefore the pre-conceptual design development for DEMO that is currently ongoing in Europe needs to be based ...

2017

Light confinement effect of non-spherical nanoscale solid immersion lenses

Hans Peter Herzig, Gaël David Osowiecki, Toralf Scharf, Myun Sik Kim

We report on the light confinement effect observed in nonideally shaped (i.e., nonspherical) nanoscale solid immersion lenses (SIL). To investigate this effect, nanostructures of various shapes are fabricated by electron-beam lithography. When completely m ...

Spie-Soc Photo-Optical Instrumentation Engineers2013

SMD pressure and flow sensors for industrial compressed air in LTCC technology

Peter Ryser, Thomas Maeder, Yannick Sébastien Fournier, Grégoire Boutinard Rouelle

In this work, we propose an SMD (surface mount device) pressure sensor in LTCC technology specially designed for standard industrial compressed air. It combines the measurement of pressure and temperature, with its integrated signal conditioning electronic ...

2009

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Engineering tolerance

On the slip burst amplitude cutoff in dislocation-rich microcrystals

Multi-Objective Optimization of Grooved Gas Journal Bearings for Robustness in Manufacturing Tolerances

1200 V Multi-Channel Power Devices with 2.8 Ω•mm ON-Resistance

STEP-NC compliant process planning of additive manufacturing: remanufacturing

A Robust Capacitive Digital Read-Out Circuit for a Scalable Tactile Skin

The DEMO wall load challenge

Escapement-Based Movements as Positioning Mechanisms: Design and Modelling

Light confinement effect of non-spherical nanoscale solid immersion lenses

An Extensive Group Decision Methodology for Alliance Partner Selection Problem in Collaborative Networked Organisations

SMD pressure and flow sensors for industrial compressed air in LTCC technology

Graph Chatbot

Chat with Graph Search

SMD pressure and flow sensors for industrial compressed air in LTCC technology

1200 V Multi-Channel Power Devices with 2.8 Ω•mm ON-Resistance

Multi-Objective Optimization of Grooved Gas Journal Bearings for Robustness in Manufacturing Tolerances

Light confinement effect of non-spherical nanoscale solid immersion lenses

On the slip burst amplitude cutoff in dislocation-rich microcrystals

A Robust Capacitive Digital Read-Out Circuit for a Scalable Tactile Skin

An Extensive Group Decision Methodology for Alliance Partner Selection Problem in Collaborative Networked Organisations

The DEMO wall load challenge

Escapement-Based Movements as Positioning Mechanisms: Design and Modelling

STEP-NC compliant process planning of additive manufacturing: remanufacturing