In architecture, a vault (French voûte, from Italian volta) is a self-supporting arched form, usually of stone or brick, serving to cover a space with a ceiling or roof. As in building an arch, a temporary support is needed while rings of voussoirs are constructed and the rings placed in position. Until the topmost voussoir, the keystone, is positioned, the vault is not self-supporting. Where timber is easily obtained, this temporary support is provided by centering consisting of a framed truss with a semicircular or segmental head, which supports the voussoirs until the ring of the whole arch is completed.
List of architectural vaultsCorbelled vaults, also called false vaults, with horizontally joined layers of stone have been documented since prehistoric times; in the 14th century BC from Mycenae. They were built regionally until modern times.
The real vault construction with radially joined stones was already known to the Egyptians and Assyrians and was introduced into the building practice of the West by the Etruscans. The Romans in particular developed vault construction further and built barrel, cross and dome vaults. Some outstanding examples have survived in Rome, e.g. the Pantheon and the Basilica of Maxentius.
Brick vaults have been used in Egypt since the early 3rd millennium BC. widely used and from the end of the 8th century B.C. Keystone vaults were built. However, monumental temple buildings of the pharaonic culture in the Nile Valley did not use vaults, since even the huge portals with widths of more than 7 meters were spanned with cut stone beams.
Dome
Amongst the earliest known examples of any form of vaulting is to be found in the neolithic village of Khirokitia on Cyprus. Dating from 6000 BCE, the circular buildings supported beehive shaped corbel domed vaults of unfired mud-bricks and also represent the first evidence for settlements with an upper floor. Similar beehive tombs, called tholoi, exist in Crete and Northern Iraq. Their construction differs from that at Khirokitia in that most appear partially buried and make provision for a dromos entry.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
This course critically interrogates the connection of modern architecture with its hypothetical origins by setting it alongside new accounts of the dawn of humanity.
En histoire de l'architecture, la stéréotomie est l'art de concevoir et fabriquer des volumes complexes en pierre et des assemblages en bois.Ce cours propose une réinterprétation de la stéréotomie
Le cours présente les bases du comportement des structures, de la détermination des efforts qui y agissent et les principes de leur dimensionnement. Le cours est basé sur la résolution des efforts par
A coffer (or coffering) in architecture is a series of sunken panels in the shape of a square, rectangle, or octagon in a ceiling, soffit or vault. A series of these sunken panels was often used as decoration for a ceiling or a vault, also called caissons ("boxes"), or lacunaria ("spaces, openings"), so that a coffered ceiling can be called a lacunar ceiling: the strength of the structure is in the framework of the coffers.
In architecture, a squinch is a triangular corner that supports the base of a dome. Its visual purpose is to translate a rectangle into an octagon. See also: pendentive. A squinch is typically formed by a masonry arch that spans a square corner. The dome chamber in the Palace of Ardashir, the Sassanid king, in Firuzabad, Iran, is the earliest surviving example of the use of the squinch, suggesting that the squinch may have been invented in Persia. After the rise of Islam, it was used in the Middle East in both eastern Romanesque and Islamic architecture.
A groin vault or groined vault (also sometimes known as a double barrel vault or cross vault) is produced by the intersection at right angles of two barrel vaults. The word "groin" refers to the edge between the intersecting vaults. Sometimes the arches of groin vaults are pointed instead of round. In comparison with a barrel vault, a groin vault provides good economies of material and labor. The thrust is concentrated along the groins or arrises (the four diagonal edges formed along the points where the barrel vaults intersect), so the vault need only be abutted at its four corners.
L'art des structures propose une découverte du fonctionnement des structures porteuses, telles que les bâtiments, les toitures ou les ponts. Ce cours présente les principes du dimensionnement et les s
Les structures en treillis, en poutre, en dalles et en cadre sont essentielles pour une grande partie des constructions modernes : immeubles pour l'habitation ou de bureaux, halles et usines, ponts, o
Nowadays, the energy efficiency of the existing building stock is internationally accepted as a topical issue. Energy retrofitting is encouraged, improving the thermal performances of buildings, but often altering the historical image of our cities. Attent ...
Excessive self-weight and difficulty in construction are the main issues confronted by super-long-span arch bridges. To address these issues, a conceptual design of steel-ultra-high performance fibre-reinforced concrete (UHPFRC) composite truss arch bridge ...
Conventional formworks for concrete curved shells either are expensive, complex and wasteful or have formal restrictions. Using tile vaults (also known as timbrel, Guastavino, thin-tile or Catalan vaults) as stay-in-place formwork for concrete shells could ...