Mihai Adrian IonescuAdrian M. Ionescu is Full Professor at the Swiss Federal Institute of Technology, Lausanne, Switzerland. He received the B.S./M.S. and Ph.D. degrees from the Polytechnic Institute of Bucharest, Romania and the National Polytechnic Institute of Grenoble, France, in 1989 and 1997, respectively. He has held staff and/or visiting positions at LETI-CEA, Grenoble, France and INP Grenoble, France and Stanford University, USA, in 1998 and 1999. Dr. Ionescu has published more than 600 articles in international journals and conferences. He received many Best Paper Awards in international conferences, the Annual Award of the Technical Section of the Romanian Academy of Sciences in 1994 and the Blondel Medal in 2009 for contributions to the progress in engineering sciences in the domain of electronics. He is the 2013 recipient of the IBM Faculty Award in Engineering. He served the IEDM and VLSI conference technical committees and was the Technical Program Committee (Co)Chair of ESSDERC in 2006 and 2013. He is a member of the SATW. He is director of the Laboratory of Micro/Nanoelectronic Devices (NANOLAB).
Christian EnzChristian C. Enz (M84, S'12) received the M.S. and Ph.D. degrees in Electrical Engineering from the EPFL in 1984 and 1989 respectively. From 1984 to 1989 he was research assistant at the EPFL, working in the field of micro-power analog IC design. In 1989 he was one of the founders of Smart Silicon Systems S.A. (S3), where he developed several low-noise and low-power ICs, mainly for high energy physics applications. From 1992 to 1997, he was an Assistant Professor at EPFL, working in the field of low-power analog CMOS and BiCMOS IC design and device modeling. From 1997 to 1999, he was Principal Senior Engineer at Conexant (formerly Rockwell Semiconductor Systems), Newport Beach, CA, where he was responsible for the modeling and characterization of MOS transistors for the design of RF CMOS circuits. In 1999, he joined the Swiss Center for Electronics and Microtechnology (CSEM) where he launched and lead the RF and Analog IC Design group. In 2000, he was promoted Vice President, heading the Microelectronics Department, which became the Integrated and Wireless Systems Division in 2009. He joined the EPFL as full professor in 2013, where he is currently the director of the Institute of Microengineering (IMT) and head of the Integrated Circuits Laboratory (ICLAB).He is lecturing and supervising undergraduate and graduate students in the field of Analog and RF IC Design at EPFL. His technical interests and expertise are in the field of very low-power analog and RF IC design, semiconductor device modeling, and inexact and error tolerant circuits and systems.He has published more than 200 scientific papers and has contributed to numerous conference presentations and advanced engineering courses. Together with E. Vittoz and F. Krummenacher he is one of the developer of the EKV MOS transistor model and the author of the book "Charge-Based MOS Transistor Modeling - The EKV Model for Low-Power and RF IC Design" (Wiley, 2006). He has been member of several technical program committees, including the International Solid-State Circuits Conference (ISSCC) and European Solid-State Circuits Conference (ESSCIRC). He has served as a vice-chair for the 2000 International Symposium on Low Power Electronics and Design (ISLPED), exhibit chair for the 2000 International Symposium on Circuits and Systems (ISCAS) and chair of the technical program committee for the 2006 European Solid-State Circuits Conference (ESSCIRC). Since 2012 he has been elected as member of the IEEE Solid-State Circuits Society (SSCS) Administrative Commmittee (AdCom). He is also Chair of the IEEE SSCS Chapter of Switzerland.
Farzan JazaeriFarzan Jazaeri received his M.Sc. degree in 2009 from University of Tehran and his Ph.D. in electronic engineering from EPFL in 2015. He has been serving as Research Scientist at EPFL since 2015 and Senior RD Semiconductor Device Engineer in the Swatch Company since 2019.He is a recipient of the 2018 Electron Devices Society George E. Smith Award, the best talk award from MIXDES 2019 and the best paper awards from ESSDERC2018 and ESSDERC2019, and several other academic awards. He is also awarded an advanced Swiss National Science Foundation grant for two years fellowship in MIT and NASA. His doctoral thesis was recognized to be eligible for the IBM award in 2017. Dr. Jazaeri is currently research scientist and project leader in high level of international scientific collaborative activities at EPFL. His research activities on solid-state physics are focused on creation of the cryogenic temperature infrastructure necessary to operate the qubits for quantum computations(MOSQUITO), radiation-induced damages in advanced devices for the future high energy physics experiments at CERN (GigaRadMOST), Pinned Photodiodes for CIS, and modeling and characterization AlGaN-GaN heterostructure in collaboration with IMEC. Together with Dr. Sallese, he is the lead developer of EPFL HEMT MODEL for GaN HEMTs. He fully developed a new model (EPFL-JL Model) for the so-called nanowire FETs and was invited by Cambridge University Press to write a book on junctionless nanowire FETs, emerging nanoelectronic devices, already published since 2018. He serves as lead editor and reviewer for several scientific journals. He has been an invited keynote speaker at several international conferences and events. He is invited to MIXDES 2019 as a keynote speaker to address quantum bits and quantum computing architecture.From Jun 2009 to February 2010, he worked on designing and implementing SD/HD broadcast systems with SAMIM-RAYANEH Co., Tehran, Iran. Between March 2010 and November 2011 he worked as a SCADA expert in Tehran Regional Electric Co. (TREC), Tehran, Iran. From September 2010 to December 2011, he continued his research activities in nano-electronics in Tehran, Iran. In December 2011, he joined to Electron Device Modelling and Technology Lab (EDLab) and pursued his Ph.D. degree at EPFL. In 2015, he received his Ph.D. from Microsystems and Microelectronics department, Integrated Systems Laboratory (STI/IC) at EPFL, Lausanne, Switzerland.
Anna Fontcuberta i Morral2014 Associate Professor at the Institut des Matériaux, EPFL
2008 Assistant Professor Tenure Track at the Institut des Matériaux, EPFL
2009 Habilitation in Physics, Technische Universität München
2005-2010 Marie Curie Excellence Grant Team Leader at Walter Schottky Institut, Technische Universität München, on leave from Centre National de la Recherche Scientifique (CNRS, France)
2004-2005 Visiting Scientist at the California Institute of Technology, on leave from CNRS; Senior Scientist and co-founder of Aonex Technologies (a startup company for large area layer transfer of InP and Ge on foreign substrates for the main application of multi-junction solar cells)
2003 Permanent Research Fellow at CNRS, Ecole Polytechnique, France
2001-2002 Postdoctoral Scholar at the California Institute of Technology
Study of wafer bonding and hydrogen-induced exfoliation processes for integration of mismatched materials in views of photovoltaic applications
Sponsor: Professor Harry A. Atwater
1998-2001 PhD in Materials Science, Ecole Polytechnique
Study of polymorphous silicon: growth mechanisms, optical and structural properties. Application to Solar Cells and Thin Film Transistors
Advisor: Pere Roca i Cabarrocas
1997-1998 Diplôme dEtudes Approfondis (D.E.A.) in Materials Science at Université Paris XI, France .
1993-1997 BA in Physics at Universitat de Barcelona
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
