Publications by Rubaiyet Iftekharul Haque

Digital manufacturing of personalised footwear with embedded sensors

Danick Briand, Rubaiyet Iftekharul Haque, Jaemin Kim, Ryan Mitchell van Dommelen

The strong clinical demand for more accurate and personalized health monitoring technologies has called for the development of additively manufactured wearable devices. While the materials palette for additive manufacturing continues to expand, the integra ...

Nature Research2023

80 K cryogenic stage for ice lithography

Danick Briand, Rubaiyet Iftekharul Haque, Jaemin Kim

We present a cryogenic system design and development for ice lithography. The cryo-stage is designed with embedded channels to allow direct liquid nitrogen flow, enabling fast cryogenic cooling, and low sample temperature. The stage cools down to 78.8 K in ...

ELSEVIER2022

Design and printing of a coplanar capacitive proximity sensor to detect the gap between dielectric foils edges

Danick Briand, Rubaiyet Iftekharul Haque, Martin Lubej

This paper presents the design and development of a coplanar capacitive proximity sensor for the detection of the gap between the edges of dielectric foils. The finite element analysis is applied to study the design of the sensor by investigating the effec ...

2022

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Danick Briand, Rubaiyet Iftekharul Haque, Sébastien Lani, Ryan Mitchell van Dommelen, Olivier Rémy Henry Chandran

In-situ laser sintering can be used to locally sinter conductive inks in an uninterrupted process, enabling the embedding of printed electronics within 3D printed structures. In this work we apply a laser sintering method to create highly conductive silver ...

2021

Fully 3D Printed Mechanical Pressure Sensors: A Comparison of Sensing Mechanisms

Danick Briand, Rubaiyet Iftekharul Haque, Ryan Mitchell van Dommelen, Julien Gaëtan Berger

Recent advances in 3D printing techniques are allowing for new ways to manufacture sensors with materials and geometries previously not exploited. In this work we present a fabrication approach for fully 3D printed soft mechanical pressure sensors, as well ...

IEEE2020

Triboelectric effect to harness fluid flow energy

Danick Briand, Rubaiyet Iftekharul Haque, Amr Yehia Hussien Mahmoud Arafat

We are reporting energy scavenging from fluid flows inside tubular structures using triboelectric effects. Two separate designs of triboelectric generators are proposed. A tubular design that uses liquid-solid interaction mechanism for water, and freestand ...

IOP PUBLISHING LTD2019

Triboelectric‐TFT Flip‐Flop for Bistable Latching of Dielectric Elastomer Actuators

Danick Briand, Herbert Shea, Rubaiyet Iftekharul Haque, Alexis Pierre Henri Marette, Xiaobin Ji, Ronan Julien Hinchet

A high‐voltage flip‐flop combining two self‐powered soft sensors with a flexible high‐voltage thin film transistor (HVTFT) is reported, and is used to electrically latch dielectric elastomer actuators (DEAs) in zero and high‐strain states. Two touch‐actuat ...

2019

Rubaiyet Iftekharul Haque

Graph Chatbot

Digital manufacturing of personalised footwear with embedded sensors

80 K cryogenic stage for ice lithography

Design and printing of a coplanar capacitive proximity sensor to detect the gap between dielectric foils edges

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Fully 3D Printed Mechanical Pressure Sensors: A Comparison of Sensing Mechanisms

Triboelectric effect to harness fluid flow energy

Triboelectric‐TFT Flip‐Flop for Bistable Latching of Dielectric Elastomer Actuators

Triboelectric freestanding flapping film generator for energy harvesting from gas flow in pipes

Self-powered triboelectric touch sensor made of 3D printed materials

Soft triboelectric generators by the use of cost-effective elastomers and simple casting process

Digital manufacturing of personalised footwear with embedded sensors

80 K cryogenic stage for ice lithography

Design and printing of a coplanar capacitive proximity sensor to detect the gap between dielectric foils edges

In-situ laser sintering for the fabrication of fully 3D printed electronics composed of elastomeric materials

Fully 3D Printed Mechanical Pressure Sensors: A Comparison of Sensing Mechanisms

Triboelectric effect to harness fluid flow energy

Triboelectric‐TFT Flip‐Flop for Bistable Latching of Dielectric Elastomer Actuators

Triboelectric freestanding flapping film generator for energy harvesting from gas flow in pipes

Self-powered triboelectric touch sensor made of 3D printed materials

Soft triboelectric generators by the use of cost-effective elastomers and simple casting process