Caractérisation de décharges à barrières diélectriques atmosphériques et sub-atmosphériques et application à la déposition de couches d'oxyde de silicium
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Two series of titania-based photocatalysts were prepared by the sputtering method, in pure Ar atmosphere at a pressure of 0.5 Pa using a vanadium target source in a direct dc mode with a discharge of 300 V. The time of deposition was varied between 1 and 1 ...
In the frame of this thesis, two similar high current DC arc (HCDCA) plasma sources were investigated in a low gas pressure regime (10-3-10-2 mbar). One of them was initially designed for the epitaxial growth of silicon and silicon germanium (LEP), the oth ...
The reliability and charging/discharging dynamics of wideband (1.5-14GHz) phase shifters made of MEMS capacitive switches using Aluminum Nitride (AlN) as dielectric are originally reported. Phase shifter lifetimes exceeding 109 cycles are achieved in hot-c ...
The use of plasmas in aerodynamics has become a recent topic of interest. The potentialities of different types of plasmas are being investigated for low velocity and high velocity flow control, as well as for plasma-assisted combustion. Dielectric barrier ...
The complex three-dimensional unsteady flow developing in the draft tube of a Francis turbine is responsible for pressure fluctuations, which could prevent the whole hydropower plant from operating safely. Indeed, the Francis draft tube is subjected to inl ...
We present an experimental study of the DC breakdown voltage of MEMS interdigitated aluminum electrodes with gaps ranging from 10 to 500 μm. Unlike most research on MEMS electrodes that was done at atmospheric pressure, our work has focused on the effect o ...
We present an experimental study of the DC breakdown voltage of MEMS interdigitated aluminum electrodes with gaps ranging from 10 to 500 µm. Unlike most research on MEMS electrodes, that was done at atmospheric pressure, our work has focused on the effect ...
Hydrocarbon injection experiments have been performed to investigate the chemical sputtering yield of carbon-fibre composites at elevated temperatures (T-surface similar or equal to 500 K) and detached plasma conditions in the JET outer divertor. A plasma ...
A process for the deposition of a solid layer onto a liquid is presented. The polymer poly-di-chloro-paraxylylene, also known as Parylene C, was grown on low vapour pressure liquids using the conventional low pressure chemical vapour deposition process. A ...
Silane and hydrogen discharges are widely used for the deposition of silicon thin film solar cells in large area plasmaenhanced chemical vapor deposition reactors. In the case of microcrystalline silicon thin film solar cells, it is of crucial importance t ...
