Cathodoluminescence intensity and dislocation contrast evolutions under electron beam excitation in epitaxial GaN laterally overgrown on (0001) sapphire
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The detrimental effects of the H on the mechanical properties of the metals are known for more than a century. One of the most important degradation mechanisms is H embrittlement (HE). In this thesis, we examined a few famous proposed mechanisms in the fie ...
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...
To reveal the operating mechanisms of plastic deformation in an FCC high-entropy alloy, the activation volumes in CrMnFeCoNi have been measured as a function of plastic strain and temperature between 77 K and 423 K using repeated load relaxation experiment ...
The structure of Al, Ge, Mo-doped Higher Manganese Silicide (HMS) crystals with the general formulas Mn(Si0.99Ge0.01)(1.75), Mn(Si0.995Ge0.005)(1.75) and (Mn0.98Mo0.02)(Si0.98Ge0.02)(1.75)Al-0.01 was investigated by scanning and transmission electr ...
Scanning transmission electron microscopy (STEM) imaging using diffraction contrast is a powerful technique to assess crystal defects. In this work it is used to assess the spatial distribution of radiation induced defect in tungsten. In effect, its irradi ...
The formation and growth of cracks by irradiation assisted stress corrosion cracking (IASCC) in light water reactor internals is a critical issue for a safe long-term operation of nuclear power plants. The IASCC susceptibility at relatively low dose is dom ...
Defects are key to enhance or deploy particular materials properties. In this thesis I present analyses of the impact of defects on the electronic structure of materials using combined experimental and theoretical Electron energy loss spectroscopy (EELS) i ...
Linear crystal defects called dislocations are one of the most fascinating concepts in materials science that govern mechanical and optoelectronic properties of many materials across a broad range of application. Three-dimensional (3-D) study of dislocatio ...
Nanocrystalline (NC) metals have attracted widespread interest in materials science due to their high strength compared to coarse-grained counterparts. It is well know that during uniaxial deformation, the stress-strain behaviour exhibits an extraordinary ...
Integrated circuit packaging technology has become a prime design consideration for the develop-ment of electronic system concepts. One key issue is the bonding layer between chip and substrate. Currently, high-lead solder materials are being used, which a ...
