Automatic Monitoring of the Riddes Bridges using Electronic Inclinometers
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In this article, the hot deformation mechanism of a laser-welded near a TA15 Ti-alloy joint was studied by hot tensile tests conducted at temperatures ranging from 800 degrees C to 900 degrees C with strain rates ranging from 1.0 x 10(-1) s(-1) to 1.0 x 10 ...
Oxide Dispersed Strengthened (ODS) ferritic stainless steels present well-known fine grains microstructures where dislocation movement is hindered by a dense precipitation of nano-oxides particles. Previous research, on the thermomechanical behavior at hig ...
The high-entropy alloy (HEA) concept was based on the idea that high mixing entropy can promote formation of stable single-phase microstructures. During the past 15 years, various alloy systems have been explored to identify HEA systems with improved prope ...
Several boreholes were drilled for site comparison of a deep geological repository (DGR) in Northern Switzerland. The main target of the exploration program was the >100m thick Opalinus Clay, the designated host rock encountered at approximately 450 to 100 ...
Metallic lithium and sodium are actively investigated as anodes for all solid-state batteries. While the mechanical properties of Li and Na remain poorly understood, there is a growing consensus that they play a crucial role in determining the integrity of ...
Microstructures in serpentine samples recovered from deformation experiments performed at high pressure (1-8 GPa), high temperature (150-500 degrees C), and laboratory strain rates (4 10(-4)-10(-6)s(-1)) were studied using transmission electron microscopy ...
Integrated circuit packaging technology has become a prime design consideration for the develop-ment of electronic system concepts. One key issue is the bonding layer between chip and substrate. Currently, high-lead solder materials are being used, which a ...
The performance of two Nb3Sn conductors for the ITER central solenoids was tested. The current sharing temperatures (T-cs) were measured over 17 050 electromagnetic cycles, including four thermal cycles between 4.2 K and room temperature. T-cs declined alm ...
We report on the diffraction peak shape evolution from cementite particles in three steel microstructures, recorded during in-situ tensile deformation at room temperature. We demonstrate that in a bainitic tempered steel the observed peak broadening and as ...
Mg and Ti alloys are attractive materials for structural applications in the transportation and biomedical industries due to their high strength-to-weight ratios. However, due to their hexagonally close-packed (HCP) lattice structure, they exhibit poor for ...
