High temperature mechanical spectroscopy of fine-grained zirconia and alumina containing nano-sized reinforcements
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Silicon nitride based ceramics (SiAlONs); tetragonal polycrystalline zirconia (3Y‐TZP); alumina and their composites reinforced with different amount of multi‐ walled carbon‐nanotubes (CNTs) have been processed by Spark Plasma Sintering (SPS). High tempera ...
The influence of the carbon content on the microstructure, phase transformation and hardness of an iron-based cermet is studied. The cermet is constituted by a high-alloyed steel as matrix, and TiCN particles (50 vol.%) as reinforcement. The material is pr ...
Strain Hardening Ultra High Performance Fiber Reinforced Concrete (SH-UHPFRC) were used successfully over the last 8 years in numerous cast in place rehabilitation applications as long lasting waterproofing layers (20 to 30 mm thickness) and, combined with ...
Zirconium is always present in Ni base superalloys as it enhances their creep properties. In the present study, the influence of very small Zr additions, 100–400 ppm, i.e. 0.01–0.04 wt.%, on hot tearing of IN738LCsuperalloy is experimentally investigated u ...
Transparent polycrystalline alumina has many possible promising areas of application from jewelry and the watch industry to wave guides, energy economical lamp envelopes, and optical windows. Ultrahigh density, submicron sized grains and/or oriented micros ...
This work describes the fabrication and test of a high temperature (+200°C) capable high frequency transformer. It was manufactured using Low Temperature Co-fired Ceramic (LTCC) technology, which allowed the complex multilayer structure of ceramic and meta ...
Thermally activated shape memory polymers (SMPs) recover from a secondary shape induced by mechanical deformation to a primary equilibrium shape when they are heated to their actuation temperature. In certain applications, for example in the biomedical fie ...
Heavily deformed 18-carat yellow gold samples show a recrystallization peak at 700 K during the first heating. The mechanical loss spectrum of polycrystals shows a relaxation peak at about 780 K, which is absent in single crystals made from the same alloy. ...
A monocrystalline 18-carat yellow gold sample is deformed stepwise from 2% to 12% at room temperature. The mechanical loss spectrum is recorded and analysed. At low deformations the exponential high temperature background increases. At a critical deformati ...
Twinning is an important deformation mode in lightweight Mg alloys, but the mechanisms of nucleation and growth of twins and their interactions with solutes remain largely unresolved. Here, a new model for thermally-activated, stress-driven growth of twin ...