Assessment of irradiation-hardening on Eurofer97' and Zircaloy 2 with punch tests and finite-element modeling
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The fib Model Code 2010 (MC2010) contains a semi-empirical formulation for the local bond-slip relationship for both pull-out and splitting failure modes (derived from short pull-out tests), as well as a semi-empirical formulation of the steel stress that ...
The forms of U-shaped UHPFRC beams have not been investigated for the highway footbridge. Compared with the traditional section forms, the U-shaped UHPFRC beams can reduce the material consumption under the condition of providing the same bearing capacity. ...
The reduced activation tempered martensitic steel Eurofer97 is a reference steel for a structural applica-tions in fusion reactors. The first-wall and blanket materials will be subjected to high thermal and neutron fluxes and will experience very complex, ...
A multi-phase Ti-6Al-4V prepared by electron beam melting and thermal post treatments has been shown to exhibit increased strength and ductility over standard wrought or hot isostatic pressed Ti-6-Al-4V. The mechanical improvements are due to a prolonged, ...
H-SA700 is a type of new ultra-high-strength structural steel that is more environmentally friendly and more suitable for mass production than conventional high-strength steel. The objective of this paper is to contribute to the practical application of CF ...
International Association of Earthquake Engineering2017
The study was undertaken to gain insight into the micro-mechanisms controlling plasticity at the micrometer scale of elastic-plastic metallic alloys. Dynamic nano-indentation tests, where a small harmonic force amplitude is superimposed during loading, ref ...
Extreme loading scenarios such as earthquakes, exceptional wind gusts or tides are characterized by very high amplitude and multidirectional cyclic loads applied to a structure. Ultra Low Cycle Fatigue (ULCF) arises in such cases and can be summarily defin ...
Determination of the initial detaching volume is one of the major challenges in snow avalanche and debris flow forecast. Soil liquefaction due to loss of cohesion results in landslides, whereas quasi-brittle failure triggers the release of snow avalanches. ...
The ductility and time-dependent recovery of a ductile acrylic adhesive were investigated in this work. The quasi-static true tensile and compressive strain behaviors were examined at different strain rates, taking large deformations into account. Yield st ...
The Task 7 of the EBS task force is devoted to the modelling of gas transport phenomena in bentonite. This report describes the second phase of Task 7 that concerns the finite element modelling of some specific tests performed on granular bentonite to asse ...
