Design and optimization of the 12.5 T EFDA dipole magnet
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The stability is a key issue to design superconducting magnets and to ensure their proper exploitation. This is the case of the imminent operation of the Large Hadron Collider (LHC) accelerator, which requires a good knowledge of the stability margin of it ...
The phase I LHC upgrade foresees the installation of a new final focusing for the high luminosity experiences in order to be able to focus the beams in the interaction points to ß* 0.25 cm. Key element of this upgrade is a large bore (120 mm) superconducti ...
The reduction of static heat load in superconducting magnet systems is of great importance because of reduction of refrigeration power and operational costs. The major elements that determine the heat load are the current leads. The use of high temperature ...
The thesis analyzes the interaction region of the Large Hadron Collider (LHC). It proposes, studies and compares several upgrade options. The interaction region is the part of the LHC that hosts the particle detectors which analyze the collisions. An upgra ...
In one of its acceptation, the word quench is synonym of destruction. And this is even more consistent with reality in the case of the Large Hadron Collider dipole magnets, whose magnetic field and stored energy are unprecedented: the uncontrolled transiti ...
Within the framework of the European Fusion Programme (EFDA) a design activity has been started in late 2004 by the EFDA Close Support Unit at Garching (FRG) to design a 12.5 T superconducting dipole magnet. The final goal of this activity is to define a " ...
The conceptual design of the large gap Spectrometer Dipole for the LHC-b experiment is presented here. The required acceptance implies a gap height of 3.6 m and a width of 4.3 m. Although the magnetic induction of the 1.92 m long magnet is only 1.1 T, it t ...
A Magnetic Switchable Device (MSD) is a ferromagnetic circuit using permanent magnets where the flux can circulate between different paths when its configuration is changed. This routes or cancels the flux through specific surfaces, and thus turns on or of ...
