Gallium arsenide p-i-n radial structures for photovoltaic applications
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We report the growth behaviour of InP, InGaAs and InGaAsP on non-planar InP substrates where ridges were formed with (111)A, (211)A, (111)B and (551BAR) sidewall planes. All three materials grow uniformly on the whole patterned surface with (111)A and (211 ...
We have studied the electrical characteristics of p‐GaAs/n‐Si (100) heterojunction diodes grown by molecular beam epitaxy in an effort to determine the interface polarity. A Ga or As pre‐exposure was used prior to the growth of p‐GaAs on n‐Si substrates to ...
Fully processed VLSI GaAs MESFET circuits, available through the MOSIS service, have recently been shown to be electrically stable after 3-h thermal cycles at 500-degrees-C. It is therefore feasible to epitaxially regrow photonic device heterostructures di ...
In order to delay the occurrence of the 2D-3D growth mode transition in highly strained InxGa1-xAs epitaxial layers grown on GaAs (001) by molecular beam epitaxy, the mass transport at the surface should be reduced. This can be achieved by increasing the g ...
We report the fabrication and characterization of lateral metal-semiconductor-metal (MSM) photodiodes on an InP substrate. The photoabsorbing layer is made of InGaAs covered by a thin InP Schottky barrier enhancement layer. Schottky contacts for the detect ...
Room‐temperature photoreflectance (PR) measurements have been used to investigate the optical transition energies in InxGa1−xAs/GaAs strained layer superlattice structures grown by molecular‐beam epitaxy (MBE). Sharp PR features indicating excellent optica ...
High strained InxGa1-xAs/GaAs quantum well (QW) structures have been grown by metalorganic molecular beam epitaxy (MOMBE) with the aim of investigating the capability of this epitaxial growth method in terms of thickness control. Emission lines from QWs wi ...
We present a correlation between the behaviour of the RHEED specular reflected beam intensity during the initial phases of growth, the MBE growth conditions (T(s), P(As4), V(GaAs)), and the surface morphology examined by Nomarski contrast microscopy after ...
We have studied the indium and gallium incorporation during growth by chemical beam epitaxy of GaInAs, GaInP and GaInAsP alloys. TMIn, TEGa, cracked AsH3 and PH3 sources were used. The indium incorporation ratio remains nearly constant over the range of pa ...
We report on the growth of barrier, reservoir and quantum well electron transfer (BRAQWET) structures using chemical beam epitaxy. The photoluminescence spectra of the structures are affected by the bias voltage. The QW emission line is extinguished at pos ...
