Publication

Real-Time High-Sensitivity Impedance Measurement Interface for Tethered BLM Biosensor Arrays

Related publications (38)

Enabling Optimal Power Generation of Flow Cell Arrays in 3D MPSoCs with On-Chip Switched Capacitor Converters

David Atienza Alonso, Marina Zapater Sancho, Alexandre Sébastien Julien Levisse, Halima Najibi

Flow cell arrays (FCAs) provide efficient on-chip liquid cooling and electrochemical power generation capabilities in three-dimensional multi-processor systems-on-chip (3DMPSoCs). When connected to power delivery networks (PDNs) of chips, the current flowi ...

2020

Actuation of piezoelectric structures with ferroelectric thin films having multiple elements

Paul Muralt

A method for driving piezoelectric elements of a micro-system. The piezoelectric elements comprising a ferroelectric thin film, and being configured to be part of any one or a combination of items of a list comprising: a cantilever, a bridge, a diaphragm, ...

2020

Design of an Energy-Efficient Current-to-Frequency Converter for a Wearable Sensor Platform

Maher Kayal, Evgenia Voulgari, François Krummenacher

This paper presents the design of the ANTIGONE ASIC in AMS 0.35 mu m technology that interfaces with ion-sensitive field effect transistors (ISFETs) to detect biomarkers like pH, Na+ and K+ in human sweat. The ISFET sensors generate a low current dc signal ...

IEEE2019

Impedance Analyser - Non-Linear Inductors and Capacitors Measurement

Impedance analyzers are essential equipment's for any engineer working in the domain of electrical circuits. The impedance of a circuit is determined by exciting this later with a sine voltage over a frequency span and by observing the current consequently ...

2019

Bi-directional brain-machine interfaces (BBMIs) that can capture electrophysiological signals and provide feedback through electrical stimulation are emerging tools with various applica-tions in fundamental neuroscience research as well as in clinical trea ...

EPFL2018

Switched-capacitor high-speed emulator for real-time fault location in electrical power systems

Maher Kayal, François Krummenacher, François Pierre Gaugaz

This research presents a discrete-time transmission line model based on the propagation of travelling waves. In this approach, the transmission line is emulated by means of many interconnected unit delay cells implemented with switched-capacitor (SC) circu ...

SPRINGER2018

A Differential Electrochemical Readout ASIC with Heterogeneous Integration of Bio-nano Sensors for Amperometric Sensing

Giovanni De Micheli, Sandro Carrara, Irene Taurino, Seyedeh Sara Ghoreishizadeh

A Monolithic biosensing platform is presented for miniaturized amperometric electrochemical sensing in CMOS. The system consists of a fully-integrated current readout circuit for differential current measurement as well as on-die sensors developed by growi ...

2017

Graphene quantum capacitors for high-Q tunable LC-tanks for RF ICs

Juan Ramon Mosig, Mihai Adrian Ionescu, Clara-Fausta Moldovan, Michele Tamagnone, Wolfgang Amadeus Vitale

We propose and characterize graphene quantum capacitors, tunable with voltage by the control of their charge density, for tunable LC tanks as essential building blocks for Radio-Frequency (RF) functions in densely integrated circuits. We fabricate and inve ...

IEEE2016

10.1 A pin-efficient 20.83Gb/s/wire 0.94pJ/bit forwarded clock CNRZ-5-coded SerDes up to 12mm for MCM packages in 28nm CMOS

Mohammad Amin Shokrollahi, Seyed Armin Tajalli, Christoph Walter, Ali Hormati, Anant Pratap Singh, Omid Talebi Amiri, Klaas Lammert Hofstra, Sergio Pesenti

High-speed signaling over package substrates is key to delivering the promise of 2.5D integration. Applications abound and include high-density memory interfaces, sub-division of large dies to increase yield and lower development time, sub-division of a di ...

2016

A 15 mu W 5.5 kS/s Resistive Sensor Readout Circuit with 7.6 ENOB

Catherine Dehollain

A low power SAR logic-based resistive sensor readout circuit is proposed. A high sensitivity thermistor is used for local temperature measurements. The need for a low-noise front-end voltage amplifier is avoided by employing time-domain operation. In each ...

Institute of Electrical and Electronics Engineers2014

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.