Contribution to the Production and Characterization of W-Y, W-Y2O3 and W-TiC Materials for Fusion Reactors
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A 2D plane-strain dynamically propagating crack under tensile loading is simulated with cohesive elements. Information of the main crack is extracted from a diffuse crack network with the use of graph properties. Micro-transgranular fracture properties are ...
Friction stir processing (FSP) is a solid state route with a capacity of preparing fine grained nanocomposites from metal sheets. In this work, we employed this process to finely distribute TiO2 nanoparticles throughout an Al-Mg alloy, aiming to enhance me ...
Silicon nitride is a widely used industrial ceramic, specifically for dynamic loading applications because of its special mechanical and material properties. The investigation of the underlying mechanisms which lead to these properties is experimentally ch ...
Grain boundaries in epitaxial graphene on the SiC(000 (1) over bar) substrate are studied using scanning tunneling microscopy and spectroscopy. All investigated small-angle grain boundaries show pronounced out-of-plane buckling induced by the strain fields ...
Negative strain-rate sensitivity due to dynamic strain aging in Aluminium-5XXX alloys leads to reduced ductility and plastic instabilities at room temperature, inhibiting application of these alloys in many forming processes. Here a hierarchical multiscale ...
The accumulative roll bonding process is one of the most prominent severe plastic deformation processes for obtaining sheet materials with ultra-fine-grained microstructures and high strength. The properties of such sheets differ significantly from those o ...
Five different grain sizes are produced in 0.17 wt% carbon steel using varying rates of cooling from austenitization temperatures. Controlled furnace cooling from 1100 °C and 950 °C produces coarse ferrite grains of 40 µm and 32 µm diameter, respectively, ...
Various thermo-mechanical treatments were applied to refine and homogenise grain size and improve mechanical properties of hot-isostatically pressed (HIP) 14%Cr ODS ferritic steel. The grain size was reduced, improving mechanical properties, tensile streng ...
The competition between dislocation emission and cleavage at a crack tip plays an important role in governing the intrinsic fracture behavior of crystalline materials. This competition is not well understood in magnesium, which has many different combinati ...
Zirconium is always present in Ni base superalloys as it enhances their creep properties. In the present study, the influence of very small Zr additions, 100–400 ppm, i.e. 0.01–0.04 wt.%, on hot tearing of IN738LCsuperalloy is experimentally investigated u ...
