Publication

Simulation of Semi-Solid Material Mechanical Behavior Using a Combined Discrete/Finite Element Method

Related publications (42)

Abnormal Grain Growth in AlScN Thin Films Induced by Complexion Formation at Crystallite Interfaces

Paul Muralt, Ramin Matloub Aghdam, Silviu Cosmin Sandu, Stefan Mertin, Mohammad Fazel Parsapour Kolour, Vladimir Pashchenko

Sputter deposited Al(1-x)ScxN thin films with a Sc content from x = 0 to 43 at% are investigated by electron microscopy in order to study and explain the formation and growth of abnormally oriented grains (AOG). It is found that the latter did not nucleate ...

WILEY-V C H VERLAG GMBH2019

The Contribution of Mechanical Spectroscopy to Understanding Grain Boundary Sliding

Daniele Mari

This review paper shows that grain boundary sliding (GBS) is a general phenomenon occurring in all classes of inorganic materials: ceramics, metals and composite materials. The occurrence of relaxations attributed to GBS is also quite general and therefore ...

UNIV FED SAO CARLOS, DEPT ENGENHARIA MATERIALS2018

Micro-mechanics of 3D architectured metals synthesized by electrodeposition

Maxime Alain Baptiste Mieszala

Cellular metallic materials have emerged as a new promising class of materials due to their lightweight porous structures and advanced multi-functional properties. Originally limited to random metallic foams, modern lithography techniques have enabled the ...

EPFL2018

Experimentation on hydraulic fracturing of Barre granite: from hydrofracturing to hydroshearing

Hydraulic fracturing is frequently used in the oil and gas industry to increase the permeability of rocks. Its application for Enhanced Geothermal Systems still faces many challenges such as the occurrence of induced seismicity and the difficulty to collec ...

2018

Nanocrystalline metals: transient testing during in situ X-ray diffraction and molecular dynamics

Zhen Sun

Nanocrystalline (NC) metals have attracted widespread interest in materials science due to their high strength compared to coarse-grained counterparts. It is well know that during uniaxial deformation, the stress-strain behaviour exhibits an extraordinary ...

EPFL2016

Mesoscopic Modeling and Experimental Investigations of the Last-Stage Solidification of Globular-Equiaxed Grains in Metallic Alloys

Christophe Mondoux

Hot tearing is a major defect of solidification processes and welding. It occurs in metallic alloys while they are in the semi-solid state and is caused by a lack of liquid feeding in the mushy zone to compensate solid network openings due to tensile and s ...

EPFL2015

GRAIN BOUNDARY RELAXATION IN Bi-CRYSTALS: MECHANICAL SPECTROSCOPY AND MOLECULAR DYNAMICS SIMULATIONS

Daniele Mari, Robert Schaller, Iva Tkalcec Vâju

Different Au-Ag-Cu samples have been studied by mechanical spectroscopy. Both polycrystals and bi-crystals show a relaxation peak at 800 K, accompanied by an elastic modulus change. Since this peak is absent in single crystals it is related to the presence ...

Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas2015

Measurement of Mechanical Coherency Temperature and Solid Volume Fraction in Al-Zn Alloys Using In Situ X-ray Diffraction During Casting

Jean-Marie Drezet, Güven Kurtuldu, Bastien Gilbert Pierre Mireux

During solidification of metallic alloys, coalescence leads to the formation of solid bridges between grains or grain clusters when both solid and liquid phases are percolated. As such, it represents a key transition with respect to the mechanical behavior ...

Springer Verlag2015

In situ X-ray Diffraction during Casting: Study of Hot Tearing in Al-Zn alloys

Jean-Marie Drezet, Güven Kurtuldu, Bastien Gilbert Pierre Mireux

During solidification of metallic alloys, coalescence corresponds to the formation of solid bridges between grains when both solid and liquid phases are percolated. As such, it represents a key transition with respect to the mechanical behaviour of solidif ...

Trans Tech Publications Switzerland2015

Theoretical modelling of grain boundary anelastic relaxations

Daniele Mari, Robert Schaller, Iva Tkalcec Vâju

Grain boundary stress relaxation in Au polycrystals and single crystals has been studied by mechanical spectroscopy. A relaxation peak related to grain boundaries is observed at 620 K. Molecular dynamics simulations on Au are performed in order to illustra ...

Pergamon-Elsevier Science Ltd2014

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.