Publication

Au-Fe alloy solidification and solid-state transformations

Related publications (35)

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

In situ X-ray Diffraction during Casting: Study of Hot Tearing in Al-Zn alloys

Jean-Marie Drezet, Güven Kurtuldu, Bastien Gilbert Pierre Mireux

During solidification of metallic alloys, coalescence corresponds to the formation of solid bridges between grains when both solid and liquid phases are percolated. As such, it represents a key transition with respect to the mechanical behaviour of solidif ...

Trans Tech Publications Switzerland2015

, ,

During solidification of metallic alloys, coalescence leads to the formation of solid bridges between grains or grain clusters when both solid and liquid phases are percolated. As such, it represents a key transition with respect to the mechanical behavior ...

Springer Verlag2015

The rigidity temperature of a solidifying alloy is the temperature at which the solid plus liquid phases are sufficiently coalesced to transmit long range tensile strains and stresses. It determines the point at which thermally induced deformations start t ...

Mdpi Ag2014

High temperature transformations in a steel-TiCN cermet

Daniele Mari

The influence of the carbon content on the microstructure, phase transformation and hardness of an iron-based cermet is studied. The cermet is constituted by a high-alloyed steel as matrix, and TiCN particles (50 vol.%) as reinforcement. The material is pr ...

Elsevier Sci Ltd2013

Competition of the primary and peritectic phases in hypoperitectic Cu-Sn alloys solidified at low speed in a diffusive regime

Michel Rappaz, Jean-Daniel Wagnière, Jonas Valloton

Directional solidification experiments on hypoperitectic Cu-Sn alloys have been performed at very low velocity in a high thermal gradient to ensure planar front growth of both phases. The diameter of the sample has been reduced to 500 mu m to strongly redu ...

Elsevier2012

Intergranular penetration of liquid gold into stainless steel

Michel Rappaz, Denis Favez, Léa Deillon, Jean-Daniel Wagnière

Intergranular penetration of liquid 18 K gold into a superaustenitic stainless steel, which occurs during laser welding of these two materials, has been studied using a C-ring device which can be put under tensile stresses by a screw. It is shown that liqu ...

Elsevier2011

, ,

Seven alloys of the ternary Au-Cu-Pt system, containing 75 or 76.5 wt.% Au with 0-15 wt.% Pt and heat-treated to a fully ordered condition, are examined using in-situ synchrotron radiation to determine transformation temperatures and phases formed, and to ...

Elsevier2011

The biomedical industry has an increasing demand for dissimilar metal joining processes, which are used for complex configuration designs, such as guidewires and other intravascular interventional devices. Their production becomes more and more challenging ...

EPFL2011

Effects of Ni additions, trace elements and solidification kinetics on microstructure formation in Sn-0.7Cu solder

Michel Rappaz, Tina Ventura

Five ternary Sn-0.7Cu-xNi alloys with nickel contents in the range 0-1000 ppm have been directionally solidified at different growth rates. The competition between primary tetragonal Sn cells/dendrites, eutectic and primary Cu6Sn5 is interpreted with phase ...

Elsevier2011

Deformation and Fracture Toughness of Two-Phase Titanium Aluminides

Nicolas Vincent Barbi

This thesis is an exploration of deformation and fracture properties of a novel two-phase α2 + γ Ti46Al8Ta (at.%) alloy featuring a "convoluted" microstructure, produced by partners within a European Union project named IMPRESS. Properties of this alloy ar ...

EPFL2010