Modelling the time-dependent rheological behaviour of heterogeneous brittle rocks
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
A full rate-dependent cohesive law is implemented in the distinct lattice spring method (DLSM) to investigate the dynamic fracturing behavior of brittle materials. Both the spring ultimate deformation and spring strength are dependent on the spring deforma ...
The purpose of this paper is to investigate experimentally the UHPFRC time-dependent behavior under sustained tensile loading and to determine the effect of the stress level on the creep response. Uniaxial tensile creep tests were performed at various stre ...
Japan Concrete Institute J(CI) Japan Society of Civil engineers (JSCE) Canadian society for Civil engineering (CSCE) ConMat'092009
In this paper, the behaviour of the tantalum subjected to a complex range of thermomechanical solicitations is studied and modelled. The objective of this work is the prediction of microstructure evolution of a tantalum part that is cold flow-formed, then ...
The purpose of this paper is to investigate experimentally the UHPFRC time-dependent behavior under sustained tensile loading and to determine the effect of the stress level on the creep response. Uniaxial tensile creep tests were performed at various stre ...
Solders are widely used as interconnect material for the electronic industry. The solder interconnect provides both electrical contact and mechanical connection between the integrated circuit devices and their substrate. Thus solders with good reliability ...
Transmission electron microscopy (TEM) has been used to investigate the effect of laponite clay on microdeformation in thin latex-based polystyrene (PS) films, in which the laponite was concentrated at the original interfaces between the PS particles. At r ...
Aluminium-5 wt.% magnesium open cell foam produced by replication and tested in tension at 300, 350 or 450 degrees C creeps at rates between 10(-3) and 10(-8) s(-1). The behaviour of the foam matches that of the alloy from which it is made: three-power law ...
Al-6.4 wt% Ni open-cell foams produced by replication are tested in compression and in tension at room temperature and creep tested in tension at 450C. The mechanical behaviour of this foam at room temperature is consistent with that observed for other ope ...
The determination of the thermal and athermal stress components using relaxation experiments along a stress-strain curve is critically evaluated. Short-term stress-relaxations are performed along the stress-strain curve of single crystals of Ge at 850 K, C ...
The creep of a dislocation on its glide plane is essentially controlled by three different stress fields: the external applied stress, the internal stress field due to a multi-scale hierarchy of different obstacles (the structural defects acting on the dis ...
