Architecture and applications of a high resolution gated SPAD image sensor

Claudio Bruschini, Samuel Burri, Edoardo Charbon, Francesco Regazzoni
Optical Soc Amer, 2014
Journal paper

Abstract

We present the architecture and three applications of the largest resolution image sensor based on single-photon avalanche diodes (SPADs) published to date. The sensor, fabricated in a high-voltage CMOS process, has a resolution of 512 x 128 pixels and a pitch of 24 mu m. The fill-factor of 5% can be increased to 30% with the use of microlenses. For precise control of the exposure and for time-resolved imaging, we use fast global gating signals to define exposure windows as small as 4 ns. The uniformity of the gate edges location is similar to 140 ps (FWHM) over the whole array, while in-pixel digital counting enables frame rates as high as 156 kfps. Currently, our camera is used as a highly sensitive sensor with high temporal resolution, for applications ranging from fluorescence lifetime measurements to fluorescence correlation spectroscopy and generation of true random numbers. (C) 2014 Optical Society of America

Official source

https://infoscience.epfl.ch/record/202525?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

, , , ,

This paper presents our work on a 65k pixel single-photon avalanche diode (SPAD) based imaging sensor realized in a 0.35 mu m standard CMOS process. At a resolution of 512 by 128 pixels the sensor is read out in 6.4ps to deliver over 150k monochrome frames per second. The individual pixel has a size of 24 mu m(2) and contains the SPAD with a 12T quenching and gating circuitry along with a memory element. The gating signals are distributed across the chip through a balanced tree to minimize the signal skew between the pixels. The array of pixels is row-addressable and data is sent out of the chip on 128 lines in parallel at a frequency of 80MHz. The system is controlled by an FPGA which generates the gating and readout signals and can be used for arbitrary real-time computation on the frames from the sensor. The communication protocol between the camera and a conventional PC is USB2. The active area of the chip is 5% and can be significantly improved with the application of a micro-lens array. A micro-lens array, for use with collimated light, has been designed and its performance is reviewed in the paper. Among other high-speed phenomena the gating circuitry capable of generating illumination periods shorter than 5ns can be used for Fluorescence Lifetime Imaging (FLIM). In order to measure the lifetime of fluorophores excited by a picosecond laser, the sensor's illumination period is synchronized with the excitation laser pulses. A histogram of the photon arrival times relative to the excitation is then constructed by counting the photons arriving during the sensitive time for several positions of the illumination window. The histogram for each pixel is transferred afterwards to a computer where software routines extract the lifetime at each location with an accuracy better than 100ps. We show results for fluorescence lifetime measurements using different fluorophores with lifetimes ranging from 150ps to 5ns.

Spie-Int Soc Optical Engineering2014

A Single Photon Avalanche Diode Array Fabricated in 0.35um CMOS and based on an Event-Driven Readout for TCSPC Experiments

Edoardo Charbon, Cristiano Niclass

The design and characterization of an imaging sensor based on single photon avalanche diodes is presented. The sensor was fully integrated in a 0.35µm CMOS technology. The core of the imager is an array of 4x112 pixels that independently and simultaneously detect the arrival time of photons with picosecond accuracy. A novel event-driven readout scheme allows parallel column-wise and non-sequential, on-demand row-wise operation. Both time-correlated and time-uncorrelated measurements are supported in the sensor. The readout scheme is scalable and requires only 11 transistors per pixel with a pitch of 25µm. A number of standard performance measurements for the imager are presented in the paper. An average dark count rate of 6Hz and 750Hz are reported at room temperature respectively for an active area diameter of 4µm and 10µm, while the dead time is 40ns with negligible crosstalk. A timing resolution better than 80ps over the entire integrated array makes this technique ideal for a fully integrated high resolution streak camera, thus enabling fast TCSPC experiments. Applications requiring low noise, picosecond timing accuracies, and measurement parallelism are prime candidates for this technology. Examples of such applications include bioimaging at cellular and molecular level based on fluorescence lifetime imaging and/or, fluorescence correlation spectroscopy, as well as fast optical imaging, optical rangefinders, LIDAR, and low light level imagers.

2006

A Time-Resolved, Low-Noise Single-Photon Image Sensor Fabricated in Deep-Submicron CMOS Technology

Edoardo Charbon, Matthew Fishburn, Marek Gersbach, John Richard Walker

We report on the design and characterization of a novel time-resolved image sensor fabricated in a 130 nm CMOS process. Each pixel within the 32x32 pixel array contains a low-noise single-photon detector and a high-precision time-to-digital converter (TDC). The 10-bit TDC exhibits a timing resolution of 119 ps with a timing uniformity across the entire array of less than 2 LSBs. The differential non-linearity (DNL) and integral non-linearity (INL) were measured at +/- 0.4 and +/- 1.2 LSBs, respectively. The pixel array was fabricated with a pitch of 50 mu m in both directions and with a total TDC area of less than 2000 mu m(2). The target application for this sensor is time-resolved imaging, in particular fluorescence lifetime imaging microscopy and 3D imaging. The characterization shows the suitability of the proposed sensor technology for these applications.

2012