Probing Absolute Spin Polarization at the Nanoscale

Maximilian Assig, Matthias Alexander Eltschka, Markus Etzkorn, Klaus Kern
Amer Chemical Soc, 2014
Journal paper

Abstract

Probing absolute values of spin polarization at the nanoscale offers insight into the fundamental mechanisms of spin-dependent transport. Employing the Zeeman splitting in superconducting tips (Meservey-Tedrow-Fulde effect), we introduce a novel spin-polarized scanning tunneling microscopy that combines the probing capability of the absolute values of spin polarization with precise control at the atomic scale. We utilize our novel approach to measure the locally resolved spin polarization of magnetic Co nanoislands on Cu(111). We find that the spin polarization is enhanced by 65% when increasing the width of the tunnel barrier by only 2.3 angstrom due to the different decay of the electron orbitals into vacuum.

Official source

https://infoscience.epfl.ch/record/205565?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related concepts

Related publications

Scanning Tunneling Microscopy using Superconducting Tips to Probe Absolute Spin Polarization

Matthias Alexander Eltschka

The interplay of superconductivity and magnetism is investigated for systems with dimensions ranging from the mesoscopic to the atomic scale by scanning tunneling microscopy (STM) at millikelvin temperatures and by numerical calculations. Based on geometrically confined superconductors in magnetic fields, a novel STM approach is introduced to quantitatively probe the spin polarization of tunneling electrons. In the first part of this work, the effects of magnetic fields and geometrical confinement are probed for superconducting vanadium STM tips. Due to the unique confinement ranging from the atomic to the mesoscopic scale, the superconducting properties of the STM tips vary considerably from their bulk counterparts. To analyze the experimentally determined magnetic field dependence of several V tips, the superconductivity is numerically calculated for modeled cone geometries with various opening angles. The numerical approach based on a one-dimensional Usadel equation leads to a direct correlation between the opening angle ¿ and the order of the superconducting phase transition. First order phase transitions occur when the opening angle is smaller than a critical value (¿ < ¿c), whilst larger opening angles (¿ > ¿c) result in second order phase transitions. The comparison of experimental findings and numerical results reveals the existence of first and second order quantum phase transitions in the V STM tips. In addition, the numerical calculations also explain experimentally observed broadening effects of the superconducting spectra by the specific tip geometry. In the second part, the superconducting V tips are employed in a novel approach to quantitatively probe the spin polarization of tunneling electrons on the nanoscale. For this purpose, the Meservey-Tedrow-Fulde technique is transferred to STM in order to combine their virtues, such as the quantitative probing capability of the spin polarization, the precise control at the atomic scale and the well-defined vacuum tunnel barrier. To demonstrate the capabilities of the new technique, the local spin structure is resolved for a magnetic Co nanoisland, where spin polarizations ranging from -56% up to 65% were found, depending on the local position. Furthermore, the spin polarization P strongly varies with the tip-to-sample distance z (dP/dz ¿ 10%/Å), which is described by the different decays of the spin-up and spin-down wave functions into the vacuum tunnel barrier. The final part describes the local interaction between isolated magnetic moments and the superconducting ground state. Copper phthalocyanine molecules on the superconducting V(100) surface induce bound states within the superconducting gap due to the magnetic coupling and the Coulomb potentials. Spatially resolved measurements reveal the non-isotropic structure of the spectral weights that is explained by the adsorption site on the 5x1 reconstruction of the V(100) surface. The quasi-particle excitations are not only observed on the magnetic molecule but also occur in its close vicinity. With increasing distance from the molecular structure, the intensities of the bound states decay within the distance x ¿ ±30Å and show periodic oscillations at the same time. Comparing the experimental findings to a one-dimensional model suggests the presence of a complicated scattering potential, which can be simplified by assuming two point scatterers within the molecular structure.

EPFL2015

Development of a Millikelvin Scanning Tunneling Microscope for Applications in Ultra High Vacuum and High Magnetic Fields

Maximilian Assig

In this thesis we discuss the realization of a scanning tunneling microscope (STM) operating at temperatures below 20 mK. This is accomplished by attaching the STM to a dilution refrigerator. We can apply high magnetic fields up to 14 T perpendicular and 0.5 T parallel to the sample surface. A full ultra high vacuum (UHV) preparation chamber is attached to the cryostat allowing in situ preparation of the samples to investigate. This setup allows us to investigate low temperature phase transitions in solids and offers the possibility for ultimate energy resolution tunneling spectroscopy measurements on the atomic scale. The concept of realizing the mK-STM is given. A main point of concern was the design of the STM unit. The choice of materials should be well adapted for the use at very low temperatures and in high magnetic fields. A special concern are thermal expansion coefficients and thermal conductivity. In addition, we analyzed the variation of the tip sample distance for a given external excitation for our STM design and two variations of the Besoke-STM by using a one dimensional mass spring model. This gives us the possibility to extract an optimization criterion for our design to limit the response of the tip sample distance to vibrations that are transmitted to the STM. The external damping mechanism, which ensures a low mutual vibration level of the STM as well as the grounding concept for the electronics is explained. To characterize the STM at operating temperatures of 1.5 K, 800 mK and 15 mK we measured topography images of Au(111) and Cu(111) surfaces. This allows us to extract the stability between tip and sample. A statistical analysis of the noise in the tunneling current without activated feedback loop yields a stability of 2.7±0.1 pm in a frequency range f ≈ 0.03 – 25 Hz at 800 mK. To verify if tip and sample are cooled efficiently, we measured the temperature at their positions with additional thermometers. We achieved 17 mK at the tip and 20 mK at the sample position, respectively. The energy resolution of the STM setup was verified by taking tunneling spectra between a superconductor and a normal conducting metal. These spectra could be fitted using the BCS theory of superconductivity. From those ts we can extract the upper limit of the effective temperature of the electrons which is Teff = 87 ± 3 mK for our best measurement. This corresponds to an energy resolution of 3.5 kbTeff = 26 ± 1 µeV. Further, the tunneling conductance between two superconductors was investigated. A sub-gap structure, which can be related to Andreev reflections in asymmetric tunneling junction was observed. In addition, at zero bias voltage a peak due to the Josephson effect can be measured. Side peaks with intensities that scale with this zero bias conductance peak appear most probably due to the interaction of Cooper pairs with the electromagnetical environment in which the junction is placed. Investigating the dependence of the conductance between a superconducting tip and a normal conducting sample on externally applied magnetic fields leads to the appearance of shoulders in the coherence peaks. These shoulders shift linearly with the external magnetic field. Such an effect has been measured for planar tunnel junctions and can be explained with the lifting of the spin degeneracy of the quasi-particle density of states in a superconductor. It was observed for the first time by Meservey, Tedrow and Fulde. The fact, that we are now able to prepare STM tips showing the Meservey-Tedrow-Fulde effect enables us to measure the absolute spin polarization at EF with atomic resolution.

EPFL2011

Nanoscale science is an emerging field of our time and opens a broad horizon for applications in almost every area of human activity, from medicine to energy storage. As usual, there are numerous challenges in the way of progress, which slow down the development and application of new ideas. Therefore the versatile investigation of nanostructures is of current importance for the realization of future technologies. The central aim of this thesis was to advance the field of molecular nanoscience on several crucial fronts. For that, the scanning tunneling microscopy (STM) was chosen as the principal experimental technique. It provides an unprecedented resolution at the atomic scale and can be used to reveal topographical or electronic properties of single molecules or atoms on conducting surfaces. Moreover, it gives a certain freedom to manipulate the object of interest at the nanoscale by the apex of the scanning tip. The introduction to this thesis gives a brief overview about the history of nanotechnology and its current status. In the first chapter the theory of the tunnelling effect and the working principle of the STM are presented and the experimental set-up is described. The second chapter is devoted to shot noise measurements with the STM. At first, the theory of shot noise is presented from the view point of the scattering approach. The challenges that arise on the way towards noise detection are discussed from two different sides: current and voltage amplification. Several test measurements are suggested for the approval of the amplification circuity. Afterwards, the data obtained on the copper and gold quantum point contact are shown. The third chapter presents an investigation of a purely organic radical with spin system 1/2. This molecule was previously studied on the Au(111) surface and demonstrated a Kondo effect in the weak coupling regime. In this thesis, its adsorption on Pd(111) and cobalt islands on Cu(111) is explored. The obtained data reveal electronic transport where molecular orbitals and vibration excitations are involved. The final chapter presents an investigation of the sequence controlled polymers - the oligo-triazole amide trimers, which were successfully deposited on the Cu(100) surface by means of the electrospray ion-beam deposition technique. The molecules show a large variety of adsorption conformations which are correlated with the sequence of monomers in the molecular backbone. Each chapter contains a summary and outlook, where possible improvements are discussed and future experiments suggested.

EPFL2015

Scanning Tunneling Microscopy using Superconducting Tips to Probe Absolute Spin Polarization

Matthias Alexander Eltschka

EPFL2015

Development of a Millikelvin Scanning Tunneling Microscope for Applications in Ultra High Vacuum and High Magnetic Fields

Maximilian Assig

EPFL2011

EPFL2015