Characterization and Optimization of Silicon Nitride Thin Films
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
We analyzed along this work the feasibility to produce high quality alumina thin films by High Vacuum Chemical Vapor Deposition (HV-CVD). We study the influence of various parameters on the growth process and on the film quality, such as substrate temperat ...
Nanowire superconducting single photon detectors (SSPDs) [1] are characterized by very high sensitivity in the near infrared (detection efficiency η up to 30%, for a dark count rate DK of few Hz), speed (up to ∼1 GHz repetition rate) and time resolution (j ...
Erbium-doped amorphous aluminum oxide layers deposited on Si or oxidized silicon substrates are promising construction pieces for future monolytic integrated optoelectronics devices. In a novel high-vacuum chemical vapor deposition setup the alumina films ...
(001)-textured AIN thin films as needed for longitudinal bulk acoustic wave (BAW) devices exhibit large mechanical stress variations and large orientation variation as a function of growth substrate properties. We prepared thin silicon and silicon dioxide ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2008
Multi-element oxynitrides of type Al-Cr-Si-O-N were prepared using r.f. magnetron sputtering from Al80Cr2.5Si17.5 (at.%) target composition and O-2/(O-2+N-2) gas flow ratio between 0 and 100%. Two series of samples varying from pure nitrides to pure oxides ...
Multilayered niobium oxynitride films were deposited onto (100) Si using DC magnetron sputtering with a reactive gas pulsing process. The argon and nitrogen flows were kept constant during sputtering of a pure niobium target and the oxygen flow was pulsed ...
Intrinsic, thermal, and hygroscopic contributions to the in-plane residual stress in silicon nitride films on polyimide substrates are identified, based on iso- hygric thermal ramps and isothermal relative humidity jumps, combined with non-linear elastic m ...
Cohesive and adhesive properties of silicon oxide barrier coatings deposited from an oxygen/hexamethyldisiloxane gas mixture by plasma enhanced chemical vapor deposition, with controlled incorporation of carbon on 12 mm thick polyethylene terephtalate film ...
DC reactive magnetron sputtering was used for the deposition of Zr–Si–N thin films. Four series of samples have been deposited at various substrate temperatures TS: 300 K, 510 K, 710 K and 910 K. Depending on TS, different N2 partial pressures pN2 were req ...
We present a MEMS process for the fabrication of arbitrary (adaptable to specific aperture geometries) stabilization of silicon nitride membranes to be used as miniature shadow masks or (nano) stencils. Stabilization was realized by the fabrication of sili ...
