Micro-mechanical finite element modeling of diagonal compression test for historical stone masonry structure
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Continuous-fiber ceramic matrix composites (CMCs) are of interest as hot-section components in gas turbine engines due to their refractoriness and low density relative to metallic alloys. In service, CMCs will be subjected to spatially inhomogeneous temper ...
The aim of the present thesis is to provide a numerical tool for the mechanical modeling of dynamic failure in concrete. This widely used construction material is characterized by a non-linear failure behavior, which is consequently difficult to describe w ...
This paper presents the results of an experimental campaign on masonry spandrels. Within this campaign four masonry spandrels were subjected to quasi-static cyclic loading. Two different spandrel configurations were tested. The first configuration comprise ...
Nowadays, composite materials are increasingly used in high technology fields such as aerospace and automotive because of the combination of excellent mechanical performance and lightweight. For these characteristics, classical metal alloys are progressive ...
Cavitation erosion during the incubation period was investigated via pitting tests conducted on three different materials: an Aluminum alloy, a Nickel Aluminum Bronze alloy and a Duplex Stainless Steel. Pitting tests were conducted in a cavitation tunnel i ...
This paper discusses on the required level of simplicity for suitable modelling of structural concrete. Traditional equilibrium-based approaches (as strut-and-tie models) are too coarse in some cases, as they account for the cracking state of concrete in a ...
In ferroic materials, the dielectric, piezoelectric, magnetic, and elastic coefficients are significantly affected by the motion of domain walls. This motion can be described as the propagation of a wall across various types and strengths of pinning center ...
In existing European recommendations the drift capacity of unreinforced masonry (URM) piers is estimated as a function of the failure mode, aspect ratio and/or axial load ratio. The empirical relationships are based on a set of results from quasi-static cy ...
In this work, we study in detail the sensing characteristics of piezoresistive force sensors based on structured LTCC (Low Temperature Co-fired Ceramic) cantilevers carrying a thick-film piezoresistive bridge. These devices show much improved sensitivity c ...
Elsevier Science, Reg Sales Off, Customer Support Dept, 655 Ave Of The Americas, New York, Ny 10010 Usa2011
In this work, we study in detail the sensing characteristics of piezoresistive force sensors based on structured LTCC (Low Temperature Co-fired Ceramic) cantilevers carrying a thick-film piezoresistive bridge. These devices show much improved sensitivity c ...