Integrated approach for auto-adaptive synchronous motor winding
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
MMS design allowing to move several cabins vertically, without counterweights. The vertical motion is performed with linear synchronous motors having stators distributed along the shafts and supplied by sectors. A simplified analytic approach developped at ...
Application of power electronics in variable speed electric drives enables utilization of ac machines with a phase number higher than three. It then becomes possible to use the additional degrees of freedom, available in multi-phase systems, to control oth ...
We present an analytical solution for the magnetic field, induced eddy currents, and the corresponding losses generated in the rotor of a slotless permanent-magnet (PM) motor. The field excitation is a current sheet placed at the stator interior surface. T ...
The paper reports the results of an experimental investigation of a five-phase two-motor drive system, consisting of a parallel connection of two induction machines (IM). Thanks to an appropriate connection of the motors, two machines are controlled indepe ...
The paper presents a method to determine hysteresis losses in synchronous permanent magnet (M) slotless motors. The method comprises four steps: (1) experimental determination of the B-H loop, () analytical modeling of the B-H loop by applying different mo ...
This paper presents a Miniature Aerial Vehicle (MAV) capable of hands-off autonomous operation within indoor environments. Our prototype is a Quadrotor weighing approximately 600g, with a diameter of 550mm, which carries the necessary electronics for stabi ...
The paper presents a completely analytical formula to determine the phase back emf of a slotted BLDC motor with interior or exterior rotor and parallel or radial permanent magnet (PM) magnetization and concentrated winding. The formula is based on integrat ...
Recent research has shown that it is possible to independently control two three-phase induction machines while supplying them via a single five-leg voltage source inverter (VSI). In such a two-motor drive system one phase of each motor is connected to a c ...
The Inertia Wheel Assembly (IWA) is composed by the IWA motor, the inertia wheel and the command electronics. IWA belongs to the Attitude Determination and Control System (ADCS) of the SwissCube satellite. Swisscube is a pico-satellite that complies with C ...
Synchronous motors require sensors in order to control these devices in speed and/or position. Basically, the auto-commutation needs 3 sensors for a 3-phase type actuator. In micro-motors, as there is no more room to place the sensors, self-sensing approac ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2007