Origin of Ferroelectric Phase in Undoped HfO2 Films Deposited by Sputtering
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The continuous downscaling of microelectronic circuits combined with increasing interest in ferroelectric thin films for non-volatile random access memories (FeRAM) is drawing great attention to small ferroelectric thin film structures. There are various c ...
Erbium-doped amorphous aluminum oxide layers deposited on Si or oxidized silicon substrates are promising construction pieces for future monolytic integrated optoelectronics devices. In a novel high-vacuum chemical vapor deposition setup the alumina films ...
The capability of switching the spontaneous polarisation under an applied electric field in ferroelectric materials can be exploited for the use in low power, non-volatile, re-writable memory devices. Currently available commercially is ferroelectric rando ...
Strontium barium niobate (SrxBa1-xNb2O6, shortly SBN) is a solid solution system with tetragonal tungsten bronze crystal structure. It exhibits a ferroelectric phase with only one polar axis and a transition temperature depending on the Sr/Ba ratio. This t ...
Deposition of thin films via hydrothermal method has various advantages: low deposition temperature, high purity, deposition on a three-dimensional structure, and a large thickness. Although an epitaxial lead zirconate titanate (PZT) thin-film deposition h ...
Titanium aluminium nitride (TiAlN)-based coatings are designed specially for applications where oxidation and wear resistance are primary demands, as in the case of cutting tools. Moreover the coatings are required to be thermally stable as well as have go ...
In the following, we report investigations of the dependencies of the structural, optical and electrical characteristics of InN thin films grown by MOCVD on the growth temperature. The layer thicknesses range from 70 to 400 nm. Their carrier concentrations ...
Using pulsed-laser deposition, a two-step growth technique was applied to epitaxial SrTiO3 (STO) thin films on LaAlO3 substrates providing a way to obtain an effective strain relaxation in these films otherwise strained due to lattice mismatch between film ...
Deposition of a hydrothermal method has a number of advantages; low deposition temperature, high-purity, deposition on a three-dimensional structure, and a large thickness. The present paper investigates the improvement of an epitaxial lead zirconate titan ...
We achieved parallel nanoscale patterning of ferroelectric complex oxides by pulsed laser deposition through a nanostencil (i.e., through a pattern of apertures in a thin free-standing membrane). Ordered arrays of nanostructured barium titanate (BaTiO3) we ...
