Publication

Firing-Through Metallisation of PERT-Like Cells Using μc-Si(n) as Thin Rear Side Full Area Passivating Contact

Christophe Ballif, Franz-Josef Haug, Quentin Thomas Jeangros, Andrea Ingenito, Sylvain Nicolay
2020
Conference paper

Abstract

37th European Photovoltaic Solar Energy Conference and Exhibition; 206-207 We present a firing-through metallisation approach for n-type passivating rear contacts that consist of a tunnelling oxide and an n-doped bilayer of a-SiOx and μc-Si. We find implied Voc up to 738 mV and contact resistivities as low as 20 mΩcm2. Implemented into 6-inch solar cells with a B-diffused emitter on the front, the best cell showed a Voc of 687 mV, FF 79.4 % and an overall efficiency of 22.2 %, proving the compatibility with metallisation by a conventional firing-through process. In view of the higher iVoc of the passivating μc-Si(n) contact, higher cell efficiencies are expected through improvements of the front side.

Official source

https://infoscience.epfl.ch/record/285619?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Christophe Ballif, Franz-Josef Haug, Quentin Thomas Jeangros, Andrea Ingenito, Sylvain Nicolay
2020
Conference paper

Abstract

Official source

https://infoscience.epfl.ch/record/285619?ln=en

About this result

Ontological neighbourhood

Energy engineering

Solar power: Topics in solar power

Related concepts (20)

Solar-cell efficiency refers to the portion of energy in the form of sunlight that can be converted via photovoltaics into electricity by the solar cell. The efficiency of the solar cells used in a photovoltaic system, in combination with latitude and climate, determines the annual energy output of the system. For example, a solar panel with 20% efficiency and an area of 1 m2 will produce 200 kWh/yr at Standard Test Conditions if exposed to the Standard Test Condition solar irradiance value of 1000 W/m2 for 2.

Crystalline silicon or (c-Si) Is the crystalline forms of silicon, either polycrystalline silicon (poly-Si, consisting of small crystals), or monocrystalline silicon (mono-Si, a continuous crystal). Crystalline silicon is the dominant semiconducting material used in photovoltaic technology for the production of solar cells. These cells are assembled into solar panels as part of a photovoltaic system to generate solar power from sunlight. In electronics, crystalline silicon is typically the monocrystalline form of silicon, and is used for producing microchips.

Thin-film solar cells are made by depositing one or more thin layers (thin films or TFs) of photovoltaic material onto a substrate, such as glass, plastic or metal. Thin-film solar cells are typically a few nanometers (nm) to a few microns (μm) thick–much thinner than the wafers used in conventional crystalline silicon (c-Si) based solar cells, which can be up to 200 μm thick. Thin-film solar cells are commercially used in several technologies, including cadmium telluride (CdTe), copper indium gallium diselenide (CIGS), and amorphous thin-film silicon (a-Si, TF-Si).

Related publications (32)

Related MOOCs (1)

Firing-Through Metallisation of PERT-Like Cells Using μc-Si(n) as Thin Rear Side Full Area Passivating Contact

Graph Chatbot

Chat with Graph Search

Contact Design for Silicon Heterojunction Solar Cells

Electrical Losses Mitigation in Silicon Heterojunction Solar Cells

Optimization of front SiNx/ITO stacks for high-efficiency two-side contacted c-Si solar cells with co-annealed front and rear passivating contacts

Contact Design for Silicon Heterojunction Solar Cells

Electrical Losses Mitigation in Silicon Heterojunction Solar Cells

Optimization of front SiNx/ITO stacks for high-efficiency two-side contacted c-Si solar cells with co-annealed front and rear passivating contacts